How to Set Ratings

Some DVD Movie discs have encoded rating levels that allow the setting of the MVP851 to prevent children from viewing inappropriate movies in your absence. A password protected lock function, set by you, sets the rating limit for disc playback. In the example below the Rating Limit will be set to Level 3 with a password of 1234.

Note: A Rating Level of 8 allows viewing of all DVD Movies and “0 Lock All” prevents any disc from being viewed. It is advisable to write down the password for future reference, as once a password has been entered it will stay in effect until removed or changed.

1.Press the SETUP Push-button on the Remote Control to access the On-Screen Setup Disc Menu. Refer to fig- ure 4 on page 18 and figure 8 on page 19.

Note: If a disc is playing when the SETUP Push-button is depressed it will stop. When the SETUP Mode is exited the disc will resume playing.

2. Select the Ratings Icon by using the Up or Down directional Push-buttons followed by the SELECT Push-button on the supplied Remote Control.

3.The Ratings Menu will now appear On-Screen with the default selection of 8 No Limit. Refer to figure 9.

4. Using the Up or Down directional Push-buttons select a Rating Limit of 3 followed by the SELECT Push-button. Refer to figures 10 and 11.

5.Enter the Password of 1234, using the Numeric Push- buttons on the Remote Control, into the On-Screen Password Icon followed by the SELECT Push-button. Refer to figure 12.

Note: If an undesired number is entered, the CLEAR Push- button on the Remote Control can be used to remove it. Each press of the push-button will remove one digit at a time starting with the digit on the right side.

6.The Setup Disc Menu will reappear. If no other changes are to be made in Setup Mode at this time, exit by pressing the RETURN Push-button and the MVP851 will return to normal operation.

Unlock the Player

1.Press the SETUP Push-button on the Remote Control to access the On-Screen Setup Disc Menu. Refer to fig-

ure 4 on page 18 and figure 8 on page 19.

2. Select the Ratings Icon by using the Up or Down directional Push-buttons followed by the SELECT Push-button.

3.The Ratings Password Enter Icon will now appear On- Screen. Refer to figure 13.

4.Using the Numeric Push-buttons on the Remote Con- trol, enter the previously set password followed by the SELECT Push-button. Refer to figure 14.

Figure 9

Figure 10

Figure 11