How to Operate the MVP851, con’t

and select the highlighted CLEAR Button Icon, then press the SELECT Push-button. Pressing the Left directional Push-button will return to a Program Entry Line.

4.Press the SELECT Push-button to enter the Track choice into memory and Program Line 2 will be highlighted.

Note: The playback time for the First Program Line will appear in the Time Column.

5.Press the Up or Down directional Push-but- tons to select the desired Track Number on the disc.

6.In a similar manner enter any selection additions to the remaining six Program Lines.

7.Start the Program Play Mode by pressing the Right directional Push-button to highlight the PLAY Button Icon and then press the SELECT Push-button to start the Program Playback.

Note: An entire Playback Program may be Cleared from memory. First press the Right directional Push-button followed by pressing the Down directional Push-button and select the highlighted CLEAR ALL Button Icon, then press the SELECT Push-button. Pressing the Left directional Push-button will return to a Program Entry Line. The Playback Program is also Cleared when the disc is removed from the MVP851.

8.To cancel the Program Playback, press the STOP Push-button twice then press the Right direc- tional Push-button followed by pressing the Down directional Push-button and select the highlighted CLEAR ALL Button Icon, then press the SELECT Push-button.

9.Press the PLAY MODE Push-button twice to exit the Program Play Mode.

Random Playback of a Disc:

1.Press the PLAY MODE Push-button twice to ac- cess the Random Playback Mode.

Note: The Front Panel Alphanumeric Display will indicate “Random”.

2.Press the PLAY Push-button to activate the Play- back.

3.To cancel the Random Playback, press the STOP Push-button twice followed by pressing the PLAY MODE Push-button once.

Progressive Scan

The Progressive Scan Circuitry in the MVP851 offers the highest possible picture quality available when the Compo- nent Video Outputs of the MVP851 are connected to a TV/

Figure 81

Figure 82

Monitor capable of Progressive Scan. Unlike a conven- tional TV with Odd and Even Scanning Lines that are inter- laced together to form a picture, the Progressive Scanning Mode scans all the lines of picture information both Odd and Even at one time, non-interlaced.

To activate the Progressive Scan Circuit on the MVP851 press the PROGRESSIVE Push-button on the Front Panel.

Note: CAUTION: DO NOT ACTIVATE the MVP851 DVD Player’s Progressive Video Display Mode unless you are certain that the TV/Monitor connected to the MVP851 is capable of displaying a Progressive Scan Signal. Failure to do so could result in possible damage to the TV/Monitor. In order to view the Progressive Scan Video Output of the MVP851, the TV/Monitor connected to it must be capable of displaying a Progressive Picture and setup to display the Progressive Signal.

MPEG Digital Noise Reduction

When the MVP851 Front Panel MPEG DNR Push-button is pressed the 3D Digital Noise Reduction Circuit is active. This will effectively and selectively remove only the noise components from the Video Signal for clear image repro- duction.