SETUP, con’t
ity for reproducing bass frequencies down to 35Hz within
1. Press the Up directional
2.Press the SELECT
3.Select the Speaker Icon Setting of Large, Small or None, that agrees with your Sound System, by us-
ing the Up or Down directional
Note: If the no Center Channel is present in the system, a phantom center channel will be created using the Front Left and Right Channels.
4.In a similar manner select the correct choice for the Left & Right Front Channels, Subwoofer Channel and Left & Right Surround Channels in the system by using the four DIRECTIONAL and SELECT
Note: If there is no Subwoofer present in the system, the Low Frequency Information below 100Hz will be redirected to the Front Left and Right Channels and only when they are set to Large. A table, on page 28, is provided to record the new Loudspeaker Size Adjustments.
5.Proceed to Loudspeaker Time Delay Settings.
LOUDSPEAKER TIME DELAY
The following Time Delay Adjustments will electroni- cally compensate for different Loudspeaker Distances from the Lis- tening/View- ing Area. Re-
fer to figure
28.Time de- lay is mea- sured in mil-
liseconds (ms) and each milli- second corre- sponds ap- proximately
Figure 28
Figure 25
Figure 26
Figure 27
25