McIntosh MVP851 owner manual U4 Menu

Page 45
Figure 109

How to Operate the MVP851, con’t

Down￿ directional Push-buttons to select U3. Refer to figure 99.

Figure 99

5.Use the Right￿ directional Push-button to highlight the Icon of the desired video adjustment. Refer to fig- ures 100, 101, 102 and 103.

Note: The adjustments allow the increasing, decreasing or both from the default setting.

Figure 100

Figure 101

Figure 102

Figure 103

U4 MENU

The U4 Video Menu permits the adjustment of various pic- ture parameters as follows:

A. The Transfer Mode - Selects from several different Progressive Scan Processing Modes.

B. 4:3 Aspect - Selects from several different Display Modes when the picture has a 4:3 aspect ratio and the TV/Monitor is set to display a 16:9 aspect ratio.

C. Shift Position - Allows the repositioning of subtitles relative to the picture.

D. Output - Allows the displaying of the picture in Black and White, Sepia Tone or as Negative.

To activate one of the above Processsing Modes perform the following steps:

1.Press the DISPLAY Push-button twice to access the second On Screen Icon.

2.Press the Up￿ directional Push-button to select the Digital Picture Mode.

3.Press the Right￿ directional Push-button to highlight the Icon to the right (Monitor) and up/down arrows will appear on the icon.

4.Press the Up￿ or Down￿ directional Push-buttons to select U1 and then press the Right￿ directional Push- button to highlight the Number in the “U” Icon and up/ down arrows will appear on the icon. Press the Up￿ or Down￿ directional Push-buttons to select U4. Refer to figure 104.

Figure 104

5.Use the Rightu directional Push-button to highlight the Icon of the desired video adjustment. Refer to figures 105, 106, 107 and 108.

Figure 105

Figure 106

Figure 107

Figure 108

Display Bightness and Display of the Bit Rate

The Bightness of the Front Panel Alphanumeric Display is adjustable. Use the Remote Control DISPLAY and DIREC- TIONAL Push-buttons to first select the second main On- Screen Icon and then the third Icon in that Group. Then se- lect the second Icon from the left and choose Bright, Dim or Auto. Refer to figure 109.

To display the Video Bit Rate On-Screen follow the same steps as above, except

set the Bit Icon to On. Then press the DISPLAY Push-but- ton twice, the bit rate will be displayed on the screen.

45

Image 45
Contents MVP851 DVD Audio / Video Player Luokan 1 Laserlaite Klass 1 Laser Apparat Important Safety Instructions Table of Contents Customer ServiceThank You Please Take a MomentConnector Information Performance Features Introduction and Performance FeaturesDimensions MVP851 Dimensions Custom Cabinet Cutout InstallationMVP851 Rear Panel Connections A McIntosh A/V Control Center How to Connect Control, Analog and Digital AudioHow to Connect Video and AC Power OFF Front Panel Indicators, Push-Buttons and SwitchFront Panel Display Remote Control Push-Buttons How to Operate the Remote Control How to Operate the Setup Mode Video Preference Default Settings Setup and Default Settings Setup Mode Default SettingsMain Settings for MULTI-CHANNEL Settings forHow to Set Disc Language SETUP, con’t How to Set Ratings SETUP, con’t How to Set Video Display Modes SETUP, con’t Loudspeaker Size How to Set Audio ParametersLoudspeaker Time Delay How to Set Audio Parameters, con’t Loudspeaker Volume Level Loudspeaker Time Delay Loudspeaker SizeLoudspeaker Levels Push-button. Refer to figure How to Set Audio Parameters, con’t How to Set the Display Settings SETUP, con’t How to Set the Other Settings How to Operate the MVP851 How to Operate the MVP851, con’t DVD-Video DVD-Audio How to Operate the MVP851, con’t How to Operate the MVP851, con’t How to Operate the MVP851, con’t How to Operate the MVP851, con’t How to Operate the MVP851, con’t How to Operate the MVP851, con’t How to Operate the MVP851, con’t U1 Menu U2 Menu U4 Menu General Specifications Specifications Audio SpecificationsVideo Specifications NtscPacking Instructions