SUPER MICRO Computer 6012P-6 P4DPR-6GM+ Quick Reference, Jumper Description Default Setting

Page 47

Chapter 5: Advanced Motherboard Setup

P4DPR-6GM+ Quick Reference

Jumper	Description	Default Setting
JBT1	CMOS Clear	Pins 1-2 (Normal)
JD1	Speaker Enable (Pins 6-7)	Closed (Enabled)
JPA1/JPA2	SCSI Channel A/B Termination	Open (Terminated)
JP3/JD4	LAN1/LAN2 Enable/Disable	Pins 1-2	(Enabled)
JP4	VGA Enable/Disable	Pins 1-2	(Enabled)
JP10-JP15	PCI-X Bus Speed Setting	See Section 5-9
JP22	SCSI Enable/Disable	Pins 1-2	(Enabled)
JP37/WD	Watchdog Enable/Disable	Open (Disabled)
JP38	Thermal Fan Enable/Disable	Open (Disabled)
JP48	Chassis/Overheat Fan Select	Closed (Chassis)

Connector	Description
ATX POWER	Primary ATX Power Connector
COM1/COM2	COM1/COM2 Serial Port Connector
CPU1/CPU2	CPU 1 and CPU2 Sockets
CPU CHS FAN	CPU 1 & 2 Chassis Fan Headers
DIMM#1A-DIMM#2B	Memory (RAM) Slots
JA1	Ultra160 LVD SCSI CH A Connector
JA2	Ultra160 LVD SCSI CH B Connector
JD1	JBT1/WD/IR/CIR/USB2/PWRLED/SPKR
JF2	Front Control Panel Connector
JP7	Floppy Disk Drive Connector
JP8	Third Power Supply Fail Header
JP35	Keylock Header
J2A/J3A	IDE#1/#2 Hard Disk Drive Connectors
J15	Secondary ATX Power Connector
J28	Keyboard Port
J29	Mouse Port
LAN1/2	Ethernet Ports
OHLED	Overheat LED Header
USB0/1	Universal Serial Bus Ports
VGA	VGA Display (Monitor) Port
WOL	Wake-on-LAN Header
WOR	Wake-on-Ring Header

5-11

Image 47

Contents Super Page Manual Organization PrefaceAbout This Manual Bios System SafetyAdvanced Motherboard Setup Advanced Chassis SetupPreface Table of Contents Advanced Motherboard Setup System SafetyAdvanced Chassis Setup Appendices BiosPage Overview Chapter Introduction to the SuperServer 6012P-6Chipset Mainboard FeaturesATI Graphics Controller Processors MemoryOnboard Scsi PCI Expansion SlotsOnboard Controllers/Ports Other FeaturesControl Panel Server Chassis FeaturesSystem Power Scsi SubsystemI/O Backplane Cooling SystemAsia-Pacific Contacting SupermicroHeadquarters European OfficeSuperserver 6012P-6 Manual Unpacking the SuperServer 6012P-6 Chapter Server InstallationPreparing for Setup Server Precautions Choosing a Setup LocationRack Precautions Identifying the Sections of the Rack Rails Installing the SuperServer 6012P-6 into a RackInstalling the Rack Rails Installing the Chassis RailsInstalling the Server into a Rack Installing the Server into the RackInstalling the Server into a Telco Rack Installing the Server into a Telco RackChecking the Motherboard Setup Superserver 6012P-6 Manual Checking the Drive Bay Setup Superserver 6012P-6 Manual Control Panel Buttons Chapter System InterfaceControl Panel LEDs Scsi Drive Carrier LEDs Motherboard LEDs Electrical Safety Precautions Chapter System SafetyGeneral Safety Precautions ESD Precautions Operating Precautions Unpacking Chapter Advanced Motherboard SetupPrecautions Handling the P4DPR-6GM+ MotherboardPGA Processor and Heatsink Installation PGA Socket Empty and with Processor Installed Heatsink Installation Connecting Power Cables Connecting CablesConnecting Data Cables P4DPR-6GM+ Front Control Panel Header Pins Connecting the Control PanelI/O Ports Installing MemoryDimm Installation See Figure Memory Support Side View of Dimm Installation into SlotPCI slots PCI card installationAdding PCI Cards P4DPR-6GM+ Motherboard LayoutP4DPR-6GM+ Quick Reference Jumper Description Default SettingConnector Description Pwrsec Connection Connector DefinitionsATX Power Connection Power LEDOverheat LED OH Power Fail LEDReset Button Extra Universal Serial Bus Headers FPUSB0/1 Power ButtonUniversal Serial Bus USB0/1 LAN1/2 Ethernet Ports Serial PortsATX PS/2 Keyboard and PS/2 Mouse Ports Fan HeadersKeylock Wake-On-LANWake-On-Ring Cmos Clear Jumper SettingsExplanation Jumpers Chassis/Overheat Fan Select LAN1 Enable/DisableLAN2 Enable/Disable VGA Enable/DisableWatchdog Enable/Disable Scsi Enable/DisableScsi Termination Enable/ Disable Speaker Enable/Disable Onboard IndicatorsThermal Fan Enable/Disable PCI-X Bus Speed SettingsFloppy/Hard Disk Drive and Scsi Connections Floppy ConnectorUltra160 Scsi Connectors IDE ConnectorsDriver/Tool Installation Display Screen Installing Software DriversSuperserver 6012P-6 User’s Manual Tools Required Chapter Advanced Chassis SetupStatic-Sensitive Devices Chassis Front and Rear Views Control PanelReplacing System Cooling Fans Installing a new fanSystem Fans System Fan FailureAccessing the Drive Bays Drive Bay Installation/RemovalMounting a Scsi drive in a drive carrier Scsi Drive InstallationInstalling/removing hot-swap Scsi drives SCA Backplane CD-ROM and Floppy Drive InstallationRemoving the power supply Power SupplyPower Supply Failure Removing/Replacing the Power SupplyRemoving/Replacing the Power Supply Superserver 6012P-6 Manual Chapter System BiosHow To Change the Configuration Data Starting the Setup UtilityPress the Delete key to enter Setup Running SetupMain Bios Setup System Date Main Bios Setup MenuMain Setup Features System TimeLegacy Diskette B Legacy Diskette aType LBA Mode ControlTransfer Mode Ultra DMA ModeQuick Boot Mode Advanced SetupInstalled OS Power Loss Control Quiet BootReset Configuration Data Device ConfigurationParallel Port InterruptSerial Port B ModeFloppy Disk Controller Large Disk Access ModeEnable Memory Gap DMA ChannelAdvanced Processor Options ECC ConfigurationECC Error Type Serr Signal ConditionDMI Event Logging Split Lock OperationsHyper-threading L3 CacheBaud Rate Clear All DMI Event LogsConsole Redirection COM Port AddressSecurity Supervisor Password IsUser Password Is Fixed Disk Boot Sector Set Supervisor PasswordSet User Password Password on BootPower Savings PowerAcpi Mode Resume Time Standby TimeoutAuto Suspend Timeout Resume on TimeCD-ROM Drive Boot+Removable Devices Intel UNDI, PXE-2.0 Network Boot+Hard Drive Select the Thermal Unit PIRSelect the Processors PIR Processor Info ROM Data Exit ExitDiscard Changes Load Setup DefaultsExit Saving Changes Exit Discarding ChangesAppendix a PhoenixBIOS Post Messages Check date and time settings System Cmos checksum bad Default configuration usedSystem timer error Real time clock errorEntering Setup System cache error Cache disabledFail-Safe Timer NMI Failed Allocation Error for deviceDevice IRQ conflict Invalid System Configuration DataPS/2 Mouse Boot Summary Screen Fixed Disk nSystem Bios shadowed Press F1 to resume, F2 to Setup, F3 for previousPress F2 to enter Setup Run the I2O Configuration UtilitySuperserver 6012P-6 Manual Post Code Description Appendix B PhoenixBIOS Post CodesRecoverable Post Errors Terminal Post ErrorsPost Code Description Post Code Description Post Code Description Following are for boot block in Flash ROM Superserver 6012P-6 Manual Appendix C Supero Doctor Key FeaturesFigure C-1. Supero Doctor III Health Information Screen Linux SupportAppendix C Supero Doctor Superserver 6012P-6 Manual Appendix D System Specifications Expansion Slots provided with butterfly riser card Power SupplyDimensions Weight