DVD/VCR to TV connection
After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV.
Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow the connection diagram.
This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for VHF and UHF reception.
Connections
TV
Note: If a VHF or UHF antenna is used,
75 ohm Coaxial Cable (supplied)
VHF/UHF IN
set the TV/CATV menu option to
the “TV” mode.
Splitter 75 ohm Input 75/300 ohm outputs
75 ohm Coaxial Cable (not supplied) (supplied)
TV with single 75 ohm VHF/UHF antenna input
TV
|
|
| Note: | If a VHF or UHF antenna is used, |
UHF |
|
|
| set the TV/CATV menu option to |
|
|
|
| the “TV” mode. |
VHF
TV with 300 ohm UHF and 75 ohm VHF
antenna inputs
75 ohm Coaxial Cable (supplied)
Splitter 75 ohm Input 300 ohm outputs (not supplied)
TV
Note: If a VHF or UHF antenna is used,
UHF
set the TV/CATV menu option to
the “TV” mode.
VHF
TV with 300 ohm UHF and 300 ohm VHF
antenna inputs
15
2C53301C | 15 |
21/4/04, 11:09