Toshiba HD-EP35KB Clock Set, OSD On/Off, Remote Controller Sound, Hdmi Control REGZA-Link, Update

Page 38

Customizing the function settings (Continued)

Clock Set

See page 20.

OSD On/Off

To activate or deactivate the operational status display on the TV screen.

On

Off

Activates the operational status display (e.g., ) on the TV screen.

Deactivates the operational status display (e.g., ) on the TV screen.

Remote Controller Sound

To turn on or off the confirmation beeper announcing when each remote command is received.

On

Off

Turns on the beep sound.

Turns off the beep sound.

HDMI Control (REGZA-Link)

To turn on or off the features offered with CEC (Consumer Electronics Control) when an HDMI device is connected to this player. Use of HDMI Control which is a feature based on HDMI-CEC requires an HDMI-CEC compatible display device.

Enable HDMI

Select “On” to control this player using the remote control of your TV.

control

To disable this function, select “Off”.

OneTouchPlay

(Only when “Enable HDMI control” is set to “On”)

 

Select “On” to turn the connected TV on if it is off and set its input to the player automatically to display the

 

player’s picture, by pressing one of (PLAY), MENU, RESUME PLAY, TOP MENU buttons.

 

To disable this function, select “Off”.

SystemStandby

(Only when “Enable HDMI control” is set to “On”)

 

Select “On” to turn off both the player and the connected TV from the TV’s remote control.

 

To disable this function, select “Off”.

When complete, select “OK” then press OK button.

Notes

•Depending on the specifications of your TV, this function does not work even when your TV is HDMI-compatible.

•All the above features may not always work on all compatible TVs.

Maintenance

Initialize

To reset all the settings listed on

page 30, 31 to factory set default.

 

Press / buttons to select “Yes” then press OK button.

Update (Firmware

If you have a broadband internet service, you may obtain firmware update over the internet using the LAN

update)

port on the back of your player.

 

 

•

BEFORE BEGINNING THE FIRMWARE UPDATE PROCESS, BE SURE TO REMOVE ANY DISCS

 

 

FROM YOUR PLAYER.

page 17). You may need to turn on DHCP and DNS ( page 24).

 

 

Please configure the LAN port (

 

•

Press SETUP and select “General” > “Maintenance”. Follow the instructions on the screen.

 

•

If a firmware update is available for your player, the player will download it. Once the firmware update

 

 

dowload process has finished, the player’s power will automatically switch off. You must wait until this

 

 

process has finished.

 

 

•

DO NOT UNPLUG, TURN OFF, OR USE ANY OTHER FEATURE OF YOUR PLAYER DURING THE

 

 

FIRMWARE UPDATE PROCESS. Doing so will cause the writing of the firmware update to the player

 

 

to be halted and the player may no longer operate properly. If the player stops working, please contact

 

 

Toshiba customer service for your country or http://www.highdefinitiondvd.eu/.

 

•

If no fimware update is available, the player will quickly exit the firmware update process.

Persistent Storage To open the menu to control player’s memory allocated for content. (Not available while a disc is loaded.) The menu selections will vary depending on the content. Operate following the instructions displayed on your screen.

Twin Format Disc

To select a layer to play, HD DVD or DVD of an HD DVD Twin Format Disc. (Not available if a disc is loaded.)

HD DVD

Only the HD DVD layer is played.

DVD

Only the DVD layer is played.

Note

• For combination discs, select the desired version by disc side (see label for information).

38

HD-EP35KE_Eng.indd 38

07.8.30 11:19:59 PM

Page 37 Page 39
Image 38
Page 37 Page 39
Contents HD-EP35KB HD-EP35KE This HD DVD player employs a Laser System Result in hazardous radiation exposureLocation of the required label Following information is only for EU-member statesImportant Safety Instructions Precautions Do not use the unit when moisture condensation may occur Moisture condensation occurs during the following casesTable of contents Disc Specification FeaturesDisc compatibility Certain system requirements Important notes about HD DVDHD output jacks Customer supportRear panel Index to parts and controlsFront panel Remote control DisplaySupplied accessories AccessoriesRemote control Loading batteriesRelease TV CODE. The brand code is memorized To program the remote control to operate your TVTV control While holding down, enter a codePreparation Resolution and connectionsWhy Hdmi connection is most recommended? Proceed the following steps to set the player readyVia component video input Connecting to a TVVia Hdmi input Via Video yellow inputVia optical digital audio output Connecting to audio systemVia Hdmi output Via 5.1ch analog audio outputLAN connection Via analog audio outputInput which the player is connected to Power connectionPowering on Press ON/STANDBYPress / to select Language, then press OK Setting up the playerLanguage Press / to select On Screen Language, then press OKTime Press To select Picture, then press OK ResolutionPress To select Resolution Setting, then press OK Table below, then press OKAudio output Press / to select Audio, then press OKFront Left / Front Right When a 2ch stereo system is connected to this playerCrossover Setting Center / L Surround / R SurroundRequires proxy setting To adjust the player’s clock via the network time protocolEnter the proxy server address when your provider EthernetCookie Setting Network SpeedPlayback starts If playback does not start, press Play PlayingPlaying a disc To resume playback from the location last stopped To pause playbackTo stop playback To change playback speedTo select the camera angle To select subtitlesTo select the sound During playback, press SubtitleTo play repeatedly To locate a positionTo check the current status C/D buttons Requirements for HD DVD discs/Web-enabled network contentHD DVD playing options in the future Cursor controlsOutput sound conversion table ADVGroup Setting Disc Details Customizing the function settingsDuring stop, press Setup To return to the previous menuSettings PictureAudio Language Language code list How to select a languageEthernet GeneralMaintenance Initialize Remote Controller SoundEnable Hdmi Update FirmwareBefore calling service personnel Symptom RemedySpecification
Top Page Image Contents