Toshiba HDD-J35 manual Installing the Recorder, Step a Connections, Connecting to TV

INSTALLING THE RECORDER

Follow steps A to C below. Your recorder will be ready to display digital programs on your TV.

STEP A: CONNECTIONS

DO NOT PLUG THE RECORDER INTO THE MAINS YET.

Before you use this recorder, it is necessary to connect it to your TV.

1 CONNECTING TO TV

1-1.Connection to Antenna

Disconnect the antenna cable from your TV and connect it to the “ANT. 1 IN” terminal on the back of the recorder.

1-2.RF Loop-through Connection

To achieve RF loop-through for the in-built twin RF tuners, connect the RF Coaxial Connectors (supplied) to the “RF 1 OUT” and “ANT. 2 IN” terminals as shown in the diagram below.

1-3.“RF OUT” Connection to TV or VCR

The “RF 2 OUT” provides you a RF loop-through function to receive analogue TV programs as well as digital programs (for Integrated Digital TVs only). Use an RF coaxial cable (not supplied) to connect the HDD-J35 “RF 2 OUT” terminal to TV’s or VCR’s antenna input.

Before connecting or disconnecting the antenna cable, unplug the recorder, VCR, TV and

antenna booster, if any.

RF Coaxial

Connector

HDD-J35

Antenna cable (not supplied)

AC IN ~

ANT. 1 IN ANT. 2 IN

RF 1 OUT RF 2 OUT

	RF coaxial cable
To TV antenna input	(not supplied)

18