Notes:
1.Alternatively, you can press the “V.FORMAT” button on the remote control to change the output format as described on page 51.
2.You can also press “A.RATIO” button on the remote control to change the aspect ratio as described on page 51
3.“AUTO - 1080i” means that the recorder is in
4.If, for purposes other than personal viewing, you display a program in a different aspect ratio from its original setting, you may infringe on the copyrights that the program may be under.
AUDIO SETUP
1. Highlight “AUDIO SETUP” and press the “ENTER” button.
2. Use the “” and “” buttons to select between “AUDIO FORMAT” and “DIGITAL OUTPUT”.
3. Press the “ENTER” button to confirm your choice.
DIGITAL OUTPUT
If the broadcasted program contains more than one type of digital audio output, use the “” and “” buttons to switch between the available options “PCM” and “Dolby Digital”.
Note: You need to connect the recorder to an amplifier with Dolby® Digital decoding capability via “DIGITAL AUDIO” optical port or coaxial port when “Dolby Digital” option is selected (Refer to page 22 for the connection details). Otherwise, you may encounter softer audio from TV.
AUDIO FORMAT
Use the “” and “” buttons to select the preferred audio format present in the program you are watching.
Note: Alternately, you can pop up the AUDIO SELECTION window by pressing the AUDIO button on the remote control. Refer to AUDIO on page 53.
PASSWORD
1. Highlight “PASSWORD” and press the “ENTER” button. When prompted, enter your current password by pressing the numeric buttons on the remote control.
2. You will then be prompted to enter the New Password.
3. Enter the new password again to reconfirm.
Notes:
1.The default password is 0000.
2.If you forget your password, consult your local dealer to perform a manual reset of your recorder.
40