Notes on batteries
Improper use of batteries may cause battery leakage and corrosion. To operate the remote control correctly, follow the instructions below.
Do not insert batteries into the remote control in the wrong direction.
Do not charge, heat, open, or
Batteries contain toxic substances. Do not dispose of them with ordinary trash. Dispose of batteries only in accordance with local ordinances.
Do not leave dead or exhausted batteries in the remote control.
Do not use different types of batteries together, or mix old and new batteries.
If you do not use the remote control for a long period of time, remove the batteries to avoid possible damage from battery corrosion.
If the remote control does not function correctly or if the operating range becomes reduced, replace all batteries with new ones.
If battery leakage occurs, wipe the battery liquid from the battery compartment, then insert new batteries.
Operating with the remote control
30O
1. Point the remote control at the remote sensor and press the buttons.
2. Distance: About 5 m from the front of the remote sensor.
30O
Within about 5m
3. Angle: About 30° in each direction of the front of the remote sensor.
Do not expose the remote sensor of the recorder to a strong light source such as direct sunlight or other illumination. If you do so, you may not be able to operate the recorder via the remote control.
Do not drop or give the remote control a shock.
Do not leave the remote control near an extremely hot or humid place.
Do not spill water or put anything wet on the remote control.
Do not disassemble the remote control.
26