
FP DISPLAY SETUP
1. Highlight “FP DISPLAY SETUP” and press the “ENTER” button.
2. Use the “” and “” buttons to choose between “MODE” and “DISP BRIGHTNESS”.
3. Under “MODE”, use the “” and “” buttons to choose between “TIME” and “CHANNEL NUMBER”. This will change the Front Panel display information.
4. Under “DISP BRIGHTNESS”, use the “” and “” buttons to choose between “OFF”, “DIMMED” or “FULL”. This will change the Front Panel display brightness. In “OFF” state, the “ON/STANDBY” LED indicator will light up in red colour.
Notes:
1.TIME mode sets the recorder’s front panel Time and Channel Display to show current time. The displayed current time is purely based on the time sent by the broadcaster of the channel you are currently viewing, which may not be accurate.
2.When the recorder is in
INFORMATION
1. Highlight “INFORMATION” and press the “ENTER” button to check hardware and software versions.
RECEIVING
45