IMPVE4P manual 1.0 4/11/03 4:34 PM Page 10
PROGRAMMING DEVICE CONTROL (continued)
5. 
Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 through 5 (starting on the previous page), trying each code for your brand until you find one that works. If it still doesn’t work, try Searching For Your Code below.
NOTE: If the device does not have a POWER key, press the 
(Play) key.
6.Repeat steps 1 through 5 (starting on the previous page) for each device you want to control. For future reference,write down each working device code in the following boxes:
DVD/VCR Code:
Device Type:____________________
AUX Code:
Device Type:____________________
CBL/SAT Code:
Device Type:____________________
TV Code:
SEARCHING FOR YOUR CODE
If your device does not respond to the remote control after trying all codes listed for your brand, or if your brand is not listed at all, try searching for your code.
NOTE: Before performing a code search for a CD or DVD player or a VCR, turn on the device and insert the required media.
For example, to search for a code for your TV:
1. 
On the remote control, press TV once.
2. 
Press and hold SET until the LED (red light)
blinks twice, then release SET.
3. 
Enter 9 - 9 - 1. The LED will blink twice.
10