IMPVE4P manual 1.0 4/11/03 4:34 PM Page 13
Clearing The Master Power Macro
1. 
Press and hold SET until the LED (red light)
blinks twice, then release SET.
2. 
Enter 9 - 9 - 5. The LED will blink twice. Then press POWER once.
3. 
Press and hold SET until the LED blinks twice, then release SET. The Master Power Macro is now cleared.
USING KEYMOVER
The One For All DVD Expert Universal Remote Control includes a Keymover feature that allows you to map (or copy) keys from one mode (i.e., source mode) to another mode (i.e., destination mode).
NOTE: The following keys should not be used as a source or
destination: DVD/VCR, AUX, CBL/SAT, TV, SET, FAV, and REC.
Programming Keymover
For example, if your DVD player does not have volume control, you can map those keys (i.e., VOL▲, VOL▼, and MUTE) from TV mode to DVD/VCR mode as follows:
1. 
Press and hold SET until the LED (red light)
blinks twice, then release SET.
2. 
Enter 9 - 9 - 4. The LED will blink twice.
3. 
For the source mode, press TV once.
4. 
For the source key, press VOL ▲ once.
5.For the destination mode, press DVD/VCR
once.
6.For the destination key, press VOL▲ once.
7.The LED will blink twice, indicating the keymoved sequence is correct.
8. 
Repeat steps 1 through 7 twice more to
map remaining volume control keys, substituting VOL▼ and MUTE as source and destination keys in steps 4 and 6.
continued on next page...
13