IMPVE4P manual 1.0 4/11/03 4:34 PM Page 31
TROUBLESHOOTING
PROBLEM: LED (red light) does not blink when you press a key.
SOLUTION: Replace batteries with two new AAA alkaline batteries.
PROBLEM: LED blinks when you press a key, but home entertainment device does not respond.
SOLUTION: Make sure the remote control is aimed at your home entertainment device and is not farther than 15 feet away.
PROBLEM: The unit does not control home enter- tainment devices or commands are not working properly.
SOLUTION: Try all listed codes for the device brands being set up. Make sure they can be operated with an infrared remote control.
PROBLEM: Changing channels does not work properly.
SOLUTION: If the original remote control required pressing ENTER to change channels, then press ENTER on the remote control after entering the channel number.
PROBLEM: Tried Searching For Your Code method and still could not find a working code.
SOLUTION: Clear the device key as follows: Press and hold SET until the LED (red light) blinks twice, then release. Next enter 9 - 9 - 2. Then press the device key to be cleared twice. Now repeat the Searching For Your Code method on page 10.
PROBLEM: CH▲ and CH▼ do not work for your
RCA TV.
SOLUTION: Due to RCA design
PROBLEM: No remote control of volume.
SOLUTION: See Changing Volume Lock on page 16 to lock/unlock volume.
PROBLEM: If the above does not work.
SOLUTION: Please contact us in any of the following ways:
• Please visit : www.oneforall.com
•If the above website is not able to provide you with the information you need, please email us at ofasupport@ueic.com
•Customer Support : (330)
31