Sony RM-VZ950T Operating Non-Preset Components, 15GB, Controlling the volume

Controlling the volume

To control the volume of an audio component (CD, MD, TAPE)

Press 2 +/– to control the volume, and to mute on the amplifier.

Example

When you press 2 +/– at “CD,” you can control the volume of the amplifier.

You can change this setting also (page 15).

To control the volume of a visual component (SAT, VCR, DVD)

Press 2 +/– to control the volume, and to mute on the TV.

Example

When you press 2 +/– at “VCR,” you can control the volume of the TV.

You can change this setting also (page 15).

Note

If you have programmed any signal on the 2 +/– or button for “TV” or “AMP” using the Learning function (page 15), that signal will not be transmitted when you control other components. To use “learned” signals, you need to program the 2 +/– or buttons for each component using the Learning function.

Operating Non-Preset Components

— Learning Function

To operate non-preset components or functions, use the following Learning procedure to “teach” any of the programmable buttons to operate the functions of another remote control. You can also use the Learning function to change the signals of individual buttons after setting the component code number.

It is recommended that you make a note of the “learned” function controls.

Note

Some specific remote control signals may not be “learned.”

Programming a component signal

Jog dial

2

Continued

15GB