Toshiba 32HLV66 Using the TV’s advanced features, Using the advanced picture settings features

Highlight Advanced Picture Settings and press

Press Yand open the Video menu.

Chapter 6: Using the TV’s advanced features

Using the advanced picture settings features

Using dynamic contrast

When dynamic contrast is set to On, the TV will detect changes in the picture quality that affect the appearance of your contrast settings and then automatically adjust the video.

When dynamic contrast is set to Off, the settings selected in the Contrast field in the Picture Settings menu will be used (- page 30).

To select dynamic contrast preferences:

1 Press Yand open the Video menu.

2 Highlight Advanced Picture Settings and press T. 3 In the Dynamic Contrast field, select either On or Off.

\

Advanced Picture Settings				ANT 1
	Dynamic Contrast		On
	CableClear		Auto
	MPEG Noise Reduction		Low
	Color Temperature		Cool
	Game Mode		Off
		Reset	Done

4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.

Note: If you select the Movie picture mode and then set the dynamic contrast to On, the picture mode automatically changes to Preference in the Picture Settings menu (- page 30).

Using CableClear® digital noise reduction

The CableClear® digital noise reduction feature allows you to reduce visible interference in your TV picture. This may be useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing a noisy video cassette or disc.

To change the CableClear settings:

1 Press Yand open the Video menu.

2 Highlight Advanced Picture Settings and press T.

3 In the CableClear field, select your desired setting.

Advanced Picture Settings				ANT 1
	Dynamic Contrast		On
	CableClear		Auto
	MPEG Noise Reduction		Low
	Color Temperature		Cool
	Game Mode		Off
		Reset	Done

Note:

•If the current input is ANT 1, VIDEO 1, or VIDEO 2, the menu will display the text “CableClear.” The available selections are Off, Auto, Low, Middle, and High.

•If the current input is Built-In DVD, ColorStream HD1, ColorStream HD2, or HDMI, the menu will display the text “DNR.” The available selections are Off, Auto, Low, Middle, and High. Auto will react proportionally to the strength of the noise. Low, Middle, and High will reduce the noise in varying degrees, from lowest to highest, respectively.

4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.

Using MPEG noise reduction

The MPEG noise reduction feature allows you to reduce visible interference caused by MPEG compression. Choices for MPEG noise reduction are Off, Low, Middle, and High. Off is automatically selected when this feature is disabled (“grayed out”).

To select the MPEG noise reduction level:

1

2T.

3 Press B or b to highlight the MPEG Noise Reduction field, and then press C or c to select either Off, Low, Middle, or High.

Advanced Picture Settings				ANT 1
	Dynamic Contrast		On
	CableClear		Auto
	MPEG Noise Reduction		Low
	Color Temperature		Cool
	Game Mode		Off
		Reset	Done

4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.

42