Toshiba 32HLV66 manual About, To start playback in the stop mode, To pause playback still mode

Using the DVD aspect ratio feature

When you view a DVD in built-in DVD, you can select the DVD aspect ratio, as described below.

• 4:3 Pan Scan: Black bars are visible on right and left sides of the screen.

The picture that right and left of background is hidden.

• 4:3 Letter Box: The picture is stretched wider and taller to fill the screen.

A B C D E F G - - - - - - - - - - - - - - - -

Letter box picture

• 16:9 Wide: The picture is stretched wider to fill the width of the screen.

Squeezed picture

To select the DVD aspect ratio:

1 Press Yand open the Video menu.

2 Highlight Theater Settings and press T.

3 In the DVD Aspect Ratio field, select the mode you prefer (4:3 Pan Scan, 4:3 Letter Box, or 16:9 Wide).

Theater Settings

DVD Aspect Ratio

16:9 Wide

Auto Aspect Ratio

On

Cinema Mode

Film

Picture Scroll

--

Picture Size

Natural

Chapter 8: DVD Playback

About	DVD	VCD	CD
The DVD	VCD	CD	icons on the heading bar show the playable

discs for the function described under that heading.

DVD : You can use this function with DVD video discs.

VCD : You can use this function with Video CDs.

CD : You can use this function with Audio CDs and CD-R/ RW discs.

To start playback in the stop mode:

Press S.

To pause playback (still mode):

Press Aduring playback.

To resume normal playback, press S.

Note: The sound is muted during still mode.

To stop playback:

Press D.

To remove the disc:

1 Press d.

2 Remove the disc after the disc comes out.

Note:

•If a non-compatible disc is loaded, “WRONG REGION” will

appear on the TV screen. In this case, check your disc again (- Installation Guide).

•Some discs may take a minute or so to start playback.

•If you insert a single-sided disc the wrong way, “DISC LOADING” will appear on the display for about 30-60 seconds and then “DISC NOT AVAILABLE” will display until you remove the disc.

•Some discs may not resume playing the same scene after stopping.

•Some playback operations of DVDs may be intentionally fixed by software producers. Since this TV plays DVDs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the DVDs.

•Do not move the TV during playback. Doing so may damage the disc. If you want to move the TV to other place or room, be sure to eject the disc and turn off the power beforehand.

•If the disc is not loaded even if the disc is inserted into the DVD disc slot, remove the disc once and try to load the disc again.

•Do not put any objects other than discs in the disc slot. Doing so may cause the TV to malfunction.

•When you press a button, there may be a slight delay before the function activates.

ResetDone

4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.

Note: To change the DVD aspect ratio you may not be viewing a DVD at the same time (must be in FULL-STOP mode, not RESUME-STOP mode).

55