Toshiba MW20FN3/R, MW24FN3/R Use DVD video discs encoded via the MPEG2 recording system

Page 18

Connections

Warning:

When playing DTS-encoded discs (unit), excessive noise may be output from the analog stereo jacks. To avoid possible damage to the audio system, you should take proper precautions when the ANALOG AUDIO OUT (L/R) jacks of the unit are connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to the BITSTREAM/PCM AUDIO OUT jack of the unit.

Connecting to an amplifier equipped with an MPEG2 audio decoder

MPEG2 sound

You can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.

Amplifier equipped with an MPEG2 audio decoder

To COAXIAL type digital audio input

• Use DVD video discs encoded via the MPEG2 recording system.

VHF/UHF

75 Ω coaxial cable

Connecting to an amplifier equipped with a digital audio input

2 channel digital stereo

You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker system (right and left front speakers).

Amplifier equipped with
a digital audio input	VHF/UHF

To COAXIAL type digital audio input

75 Ω coaxial cable

Notes:

•DO NOT connect the BITSTREAM/PCM AUDIO OUT jack of the unit to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the BITSTREAM/PCM AUDIO OUT jack of the unit.

•Connect the BITSTREAM/PCM AUDIO OUT jack of the unit to the “COAXIAL” input of a Receiver or Processor.

•Refer to the owner’s manual of the connected equipment as well.

•When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

•The output sound of the unit has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

•Turn off the amplifier before you connect or disconnect the unit’s power cord. If you leave the amplifier power on, the speakers may be damaged.

18

Image 18

Contents MW20FN3/R MW24FN3/R Introduction Location of the required MarkingPower Sources Grounding or Polarization CleaningAccessories POWER-CORD ProtectionSafety Check Power LinesReplacement Parts Connecting Laser BeamImportant Safeguards / Power Source To USE AC Power SourceTo obtain a clear picture PrecautionsDo not use the unit when moisture condensation may occur Moisture condensation occurs during the following casesOn handling discs Structure of disc contents On cleaning discsOn storing discs On Video CDs Playable discsDVD Contents Identification of Controls Front panelRear panel TV/VCR operation status DVD/Audio CD/Video CD operation statusDVD Closed Caption button Remote controlVolume ChannelBattery precautions OperationAntenna connections ConnectionsCable TV Connections For subscriber to basic cable TV serviceFor subscriber to scrambled cable TV service ConnectionsConnecting to optional equipment Connecting a camcorder or a TV gameConnecting to an audio system Connecting to an amplifier equipped with a DTS decoder Dolby DigitalUse DVD video discs encoded via the MPEG2 recording system Setting the language Setting the languageBasic setup Auto Clock adjustment Clock settingAuto Clock setting To set Auto Clock to OFFTo set standard time To set daylight saving timeManual clock setting To make corrections any time during the processEnter TV operation VolumeTV Operation TV/VCRSleep Mute ChannelChannel return Closed Captioning with a VCR What is Closed CAPTIONING?Closed Captions To View Closed CaptionsTuner setting Setting channels automaticallyTV/CATV selection Press or to select ADD/DELETE, then press Enter Select the desired channel to be added or deleted using orTo ADD/DELETE channels Press Enter to select ADD or DELSetting the V-Chip To register passwordTo set the V-chip Press To select V-CHIP Press or to select desired rating, then press EnterPG-13 Parental guidance Press Enter to display ON. V-CHIP SETEnter the same password again to confirm, then press Enter To Change passwordPress MENU. Press or to select TV SETUP, then press Enter Press or to select Change PASSWORD, then press EnterPress or to select ON/OFF TIMER, then press Enter To set the on timerTo set the on timer Press or to select on TIMER, then press EnterTo set the off timer To set the off timerPicture control adjustment Picture control adjustmentPress To adjust the setting Sound control adjustmentSound control adjustment Press or to select AUDIO, then pressUnloading Loading and unloading a cassette tapeLoading To prevent accidental erasureCassette tape playback PlaybackRewind or forward the tape Special playback Using the real time tape counter Convenient functionRepeat playback Zero return function Video head cleaning VCRRecording a TV program Recording a TV programRecording VCR To stop recording To stop recording temporarilyPAUSE/STILL To cancel OTR One-touch Timer Recording OTROne-touch Timer Recording OTR Set TV or Catv option to the appropriate positionTimer recording Timer recordingExample To set daily/weekly timer To confirm the settings To cancel a programIf the programs overlap another Other functions VCR To cancel the surround sound mode Setting the surround sound Setting the stable soundSetting the surround sound Setting the stable sound Other functions VCRListening to SAP Second Audio Program SAP Stereo recording and playbackPress or to select SAP. Then press Enter to select on Output selectionDuplicating a video tape Duplicating a video tapeRecording a DVD/CD disc Duplicating a DVD or CD discPreparation PowerPress DVD to select DVD mode VCD PreparationPlayback procedure VCD Playback procedureReview playback VCD Fast forward playbackVCD Frame advance VCD Slow-motion playbackVCD Locating desired scene Zooming/Locating desired sceneDvdvcd Zooming Advanced playback DVDVCD Repeat A-B Repeat, Random and Program playback/Repeat A-BVCD Repeat, Random and Program playback Program menuDVD Subtitles Changing soundtrack language SubtitlesDVD Changing soundtrack language Audio SelectDVD Title Selection Changing angles/Title selection/DVD menuDVD Changing Angles DVD DVD MenuSetting language DVD Setting LanguageFunction setup DVD DVD Setting on screen display ReturnDynamic Range Control DVD Dynamic Range ControlPress Or Enter to select DRC Parental control setting DVD Parental control settingDVD Menu To change the parental level DVD To change the parental levelDVD Temporary disabling of rating level by DVD disc Playback will commence if the entered password was correctSetup DVD Load a DVD disc and press Play seeSymptoms Cause Possible Solutions Power Before calling service personnelSymptoms and correction OthersSymptoms Cause Possible Solutions VCR Remote ControlReception disturbances IgnitionLanguage code list Supplied accessories SpecificationsGeneral / input / output / supplied accessories GeneralLimited warranty OthersHow to Obtain Warranty Service Continental United States contact Hawaii Contact