Toshiba MW20FN3/R, MW24FN3/R owner manual Reception disturbances, Ignition

Page 64

Others

Reception disturbances

Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the unit is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast.

IGNITION

Black spots or horizontal streaks may appear, the picture may flutter or drift.

Usually caused by interference from automobile ignition systems, neon lamps or

AC powered tools and appliances such as drills or hair dryers.

GHOSTS

Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected by tall buildings, hills or other large objects. Changing the direction or position of the antenna may improve the reception.

SNOW

If the TV/VCR/DVD is located far from the TV station, in a fringe reception area where the signal is weak, small dots may appear in the picture.

If the signal is extremely weak, the installation of a larger external antenna may be necessary.

RADIO FREQUENCY INTERFERENCE (RFI)

Caused by two-way radios, this type of interference produces moving ripples or diagonal streaks in the picture. Some cases may cause a loss of contrast in the picture. Changing the direction and position of the antenna or installing an RFI filter may improve the picture.

PICTURE SIZE VARIATION

A slight picture size variation is normal when you adjust the CONTRAST or

BRIGHTNESS settings.

CARE AND MAINTENANCE

To prevent fire or shock hazard, disconnect the unit from the power source before cleaning.

The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture. Use caution when cleaning or wiping the plastic parts.

64

Image 64

Contents MW20FN3/R MW24FN3/R Introduction Location of the required MarkingCleaning AccessoriesPower Sources Grounding or Polarization POWER-CORD ProtectionPower Lines Replacement PartsSafety Check Connecting Laser BeamImportant Safeguards / Power Source To USE AC Power SourcePrecautions Do not use the unit when moisture condensation may occurTo obtain a clear picture Moisture condensation occurs during the following casesOn cleaning discs On handling discs Structure of disc contentsOn storing discs Playable discs On Video CDsDVD Contents Front panel Identification of ControlsRear panel DVD/Audio CD/Video CD operation status TV/VCR operation statusDVD Remote control VolumeClosed Caption button ChannelBattery precautions OperationAntenna connections ConnectionsFor subscriber to basic cable TV service For subscriber to scrambled cable TV serviceCable TV Connections ConnectionsConnecting a camcorder or a TV game Connecting to optional equipmentConnecting to an audio system Connecting to an amplifier equipped with a DTS decoder Dolby DigitalUse DVD video discs encoded via the MPEG2 recording system Setting the language Setting the languageBasic setup Clock setting Auto Clock settingAuto Clock adjustment To set Auto Clock to OFFTo set standard time To set daylight saving timeTo make corrections any time during the process Manual clock settingEnter Volume TV OperationTV operation TV/VCRChannel Sleep MuteChannel return What is Closed CAPTIONING? Closed CaptionsClosed Captioning with a VCR To View Closed CaptionsSetting channels automatically Tuner settingTV/CATV selection Select the desired channel to be added or deleted using or To ADD/DELETE channelsPress or to select ADD/DELETE, then press Enter Press Enter to select ADD or DELTo register password Setting the V-ChipTo set the V-chip Press or to select desired rating, then press Enter PG-13 Parental guidancePress To select V-CHIP Press Enter to display ON. V-CHIP SETTo Change password Press MENU. Press or to select TV SETUP, then press EnterEnter the same password again to confirm, then press Enter Press or to select Change PASSWORD, then press EnterTo set the on timer To set the on timerPress or to select ON/OFF TIMER, then press Enter Press or to select on TIMER, then press EnterTo set the off timer To set the off timerPicture control adjustment Picture control adjustmentSound control adjustment Sound control adjustmentPress To adjust the setting Press or to select AUDIO, then pressLoading and unloading a cassette tape LoadingUnloading To prevent accidental erasurePlayback Cassette tape playbackRewind or forward the tape Special playback Convenient function Using the real time tape counterRepeat playback Zero return function Video head cleaning VCRRecording a TV program Recording a TV programRecording VCR To stop recording temporarily To stop recordingPAUSE/STILL One-touch Timer Recording OTR One-touch Timer Recording OTRTo cancel OTR Set TV or Catv option to the appropriate positionTimer recording Timer recordingExample To cancel a program To set daily/weekly timer To confirm the settingsIf the programs overlap another Setting the surround sound Setting the stable sound Setting the surround sound Setting the stable soundOther functions VCR To cancel the surround sound mode Other functions VCRSecond Audio Program SAP Stereo recording and playback Press or to select SAP. Then press Enter to select onListening to SAP Output selectionDuplicating a video tape Duplicating a video tapeRecording a DVD/CD disc Duplicating a DVD or CD discPower Press DVD to select DVD modePreparation VCD PreparationPlayback procedure VCD Playback procedureVCD Fast forward playback VCD Frame advanceReview playback VCD Slow-motion playbackZooming/Locating desired scene Dvdvcd ZoomingVCD Locating desired scene Advanced playback DVDRepeat, Random and Program playback/Repeat A-B VCD Repeat, Random and Program playbackVCD Repeat A-B Program menuChanging soundtrack language Subtitles DVD Changing soundtrack languageDVD Subtitles Audio SelectChanging angles/Title selection/DVD menu DVD Changing AnglesDVD Title Selection DVD DVD MenuDVD Setting Language Setting languageFunction setup DVD DVD Setting on screen display ReturnDVD Dynamic Range Control Dynamic Range ControlPress Or Enter to select DRC DVD Parental control setting Parental control settingDVD Menu To change the parental level DVD To change the parental level Playback will commence if the entered password was correct Setup DVD DVD Temporary disabling of rating level by DVD disc Load a DVD disc and press Play seeBefore calling service personnel Symptoms and correctionSymptoms Cause Possible Solutions Power OthersSymptoms Cause Possible Solutions VCR Remote ControlReception disturbances IgnitionLanguage code list Specifications General / input / output / supplied accessoriesSupplied accessories GeneralLimited warranty OthersHow to Obtain Warranty Service Continental United States contact Hawaii Contact