Toshiba MW20FN3/R Auto Clock setting, Auto Clock adjustment, To set Auto Clock to OFF

Basic setup

Clock setting	POWER
The Auto Clock function will automatically set the built-in clock (Month,	DISPLAY
Day, Year and Time) when the unit is connected to an Antenna or Cable
system and it is turned off. As the unit searches for a receivable station
in your area and it receives a broadcast signal for Auto Clock, the Auto	2,3
Clock needs several minutes to set itself.

1,5

2,4

Auto Clock setting

Preparation:

•Connect the Antenna or Cable system.

•If you use a cable box, turn it on.

•Plug the AC Power cord to the AC outlet.

1	Make sure the unit is turned off.
	POWER		• If you press POWER, the Auto Clock
			set is not effective.
2	Wait at least three minutes and press POWER.
			The POWER indicator will light.
POWER		POWER
3 screen.			TV/VCR
	Press DISPLAY to check the clock on the
	DISPLAY		8 : 47AM MON	CH 125
			STEREO SAP

00 :00 :00 SP

4 If the clock is not set, check the antenna condition. The Auto Clock may not function properly if the reception condition is not good.

Auto Clock adjustment

The Auto Clock adjustment will be performed at 12:00 PM everyday if you turn off the unit.

•If you use a cable box and you want Auto Clock adjustment to be performed, the cable box must be left on.

•The Auto Clock adjustment is not effective when there is a difference of more than 5 minutes exists between the built-in clock time and the actual time.

To set Auto Clock to OFF

When shipped from factory the AUTO CLOCK is set to “ON”. But if you do not want Auto Clock set (Adjustment):

1	Press MENU.
		M E N U
		TIMER REC SET
	MENU	TV SETUP
		CH SETUP

AUTO REPEAT ON OFF

SYSTEM SETUP

SETUP

〈 //ENTER/MENU〉

2 Press or to select “SYSTEM SETUP”, then press ENTER.

		M E N U
		TIMER REC SET
ENTER		TV SETUP
		CH SETUP
		AUTO REPEAT ON OFF
		SYSTEM SETUP
	〈	/ /ENTER/MENU〉

3 Press or to select “AUTO CLOCK”.

	SYSTEM SETUP
ENTER	CLOCK SET
	LANGUAGE/IDIOMA/LANGUE
	AUTO CLOCK ON OFF
	STANDARD TIME
	DAYLIGHT SAVING TIME
	〈 / /ENTER/MENU〉

4 Press ENTER to select “OFF”.

	SYSTEM SETUP
ENTER	CLOCK SET
	LANGUAGE/IDIOMA/LANGUE
	AUTO CLOCK ON OFF
	STANDARD TIME
	DAYLIGHT SAVING TIME
	〈 / /ENTER/MENU〉

5 Press MENU repeatedly until the MENU screen is cleared.

MENU • When the AUTO CLOCK is set to “OFF”, the Auto Clock adjustment

SETUPdoes not function.

• Set the clock manually 22 .

20