Toshiba MW24FN3/R, MW20FN3/R owner manual Duplicating a video tape

Page 47

Duplicating a video tape

TV/VCR

If you connect the unit to another VCR or Camcorder, you can	3
duplicate a previously recorded tape. Make all connections before	3
turning on the power.

3

2

1

Duplicating a video tape

Preparation:

•Press TV/VCR to select the TV/VCR mode.

•Load a cassette tape with the erase prevention tab intact.

•Load a previously recorded tape into the playback VCR or Camcorder.

1 Press SP/SLP to select the desired tape speed SP or SLP.

SP/SLP	It is recommended that you set the
	Speed to the SP mode on the
RETURN	recording VCR for best results.

Connection with second video recorder

• Select “LINE1” on step 2.

Playback VCR

To VIDEO OUT	To AUDIO (R) OUT
Audio/Video cable (not supplied)	To AUDIO (L) OUT
Recording VCR

2 Press INPUT SELECT once or twice to select AUDIO/VIDEO input position.

“LINE1” or “LINE2” will appear on the

INPUT	screen.
SELECT	LINE1	VHF/UHF	To VIDEO IN
	LINE1	DIGITAL AUDIO	To VIDEO IN

Other

ZOOM

To AUDIO (L) IN

functions

To AUDIO (R) IN

LINE1: on the rear panel

LINE2: on the front panel

3 Press both REC at the same time, then press

PAUSE/STILL.

REC PAUSE/STILL

4 Press PLAY on the playback VCR, then press

PAUSE/STILL.

5 Release the recording pause and the playback.

Note:

Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringe the rights of copyright owners and be contrary to copyright laws.

Connection with Camcorder

• Select “LINE2” on step 2.

Playback Camcorder

Recording VCR	To AV Jack

Illustration of

MW20FN3/R

To AUDIO (R) IN

To AUDIO (L) IN

To VIDEO IN

Audio/Video cable (not supplied)

For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer’s instructions. A typical camcorder dubbing hookup is shown above.

(VCR)

47

Image 47

Contents MW20FN3/R MW24FN3/R Location of the required Marking IntroductionPOWER-CORD Protection CleaningAccessories Power Sources Grounding or PolarizationConnecting Laser Beam Power LinesReplacement Parts Safety CheckTo USE AC Power Source Important Safeguards / Power SourceMoisture condensation occurs during the following cases PrecautionsDo not use the unit when moisture condensation may occur To obtain a clear pictureOn storing discs On handling discs Structure of disc contentsOn cleaning discs DVD On Video CDsPlayable discs Contents Rear panel Identification of ControlsFront panel DVD TV/VCR operation statusDVD/Audio CD/Video CD operation status Channel Remote controlVolume Closed Caption buttonOperation Battery precautionsConnections Antenna connectionsConnections For subscriber to basic cable TV serviceFor subscriber to scrambled cable TV service Cable TV ConnectionsConnecting to an audio system Connecting to optional equipmentConnecting a camcorder or a TV game Dolby Digital Connecting to an amplifier equipped with a DTS decoderUse DVD video discs encoded via the MPEG2 recording system Basic setup Setting the languageSetting the language To set Auto Clock to OFF Clock settingAuto Clock setting Auto Clock adjustmentTo set daylight saving time To set standard timeEnter Manual clock settingTo make corrections any time during the process TV/VCR VolumeTV Operation TV operationChannel return Sleep MuteChannel To View Closed Captions What is Closed CAPTIONING?Closed Captions Closed Captioning with a VCRTV/CATV selection Tuner settingSetting channels automatically Press Enter to select ADD or DEL Select the desired channel to be added or deleted using orTo ADD/DELETE channels Press or to select ADD/DELETE, then press EnterTo set the V-chip Setting the V-ChipTo register password Press Enter to display ON. V-CHIP SET Press or to select desired rating, then press EnterPG-13 Parental guidance Press To select V-CHIPPress or to select Change PASSWORD, then press Enter To Change passwordPress MENU. Press or to select TV SETUP, then press Enter Enter the same password again to confirm, then press EnterPress or to select on TIMER, then press Enter To set the on timerTo set the on timer Press or to select ON/OFF TIMER, then press EnterTo set the off timer To set the off timerPicture control adjustment Picture control adjustmentPress or to select AUDIO, then press Sound control adjustmentSound control adjustment Press To adjust the settingTo prevent accidental erasure Loading and unloading a cassette tapeLoading UnloadingRewind or forward the tape Cassette tape playbackPlayback Special playback Repeat playback Using the real time tape counterConvenient function VCR Zero return function Video head cleaningRecording VCR Recording a TV programRecording a TV program PAUSE/STILL To stop recordingTo stop recording temporarily Set TV or Catv option to the appropriate position One-touch Timer Recording OTROne-touch Timer Recording OTR To cancel OTRExample Timer recordingTimer recording If the programs overlap another To set daily/weekly timer To confirm the settingsTo cancel a program Other functions VCR Setting the surround sound Setting the stable soundSetting the surround sound Setting the stable sound Other functions VCR To cancel the surround sound modeOutput selection Second Audio Program SAP Stereo recording and playbackPress or to select SAP. Then press Enter to select on Listening to SAPDuplicating a video tape Duplicating a video tapeDuplicating a DVD or CD disc Recording a DVD/CD discVCD Preparation PowerPress DVD to select DVD mode PreparationVCD Playback procedure Playback procedureVCD Slow-motion playback VCD Fast forward playbackVCD Frame advance Review playbackAdvanced playback DVD Zooming/Locating desired sceneDvdvcd Zooming VCD Locating desired sceneProgram menu Repeat, Random and Program playback/Repeat A-BVCD Repeat, Random and Program playback VCD Repeat A-BAudio Select Changing soundtrack language SubtitlesDVD Changing soundtrack language DVD SubtitlesDVD DVD Menu Changing angles/Title selection/DVD menuDVD Changing Angles DVD Title SelectionFunction setup DVD Setting languageDVD Setting Language Return DVD Setting on screen displayPress Or Enter to select DRC Dynamic Range ControlDVD Dynamic Range Control DVD Menu Parental control settingDVD Parental control setting DVD To change the parental level To change the parental levelLoad a DVD disc and press Play see Playback will commence if the entered password was correctSetup DVD DVD Temporary disabling of rating level by DVD discOthers Before calling service personnelSymptoms and correction Symptoms Cause Possible Solutions PowerRemote Control Symptoms Cause Possible Solutions VCRIgnition Reception disturbancesLanguage code list General SpecificationsGeneral / input / output / supplied accessories Supplied accessoriesOthers Limited warrantyContinental United States contact Hawaii Contact How to Obtain Warranty Service