Toshiba 15CV100U Connecting a digital audio system, TV’s Digital Audio OUT terminal, Sound menu

Chapter 2: Connecting your TV

Connecting a digital audio system

The TV’s DIGITAL AUDIO OUT terminal

outputs a Dolby®* Digital or 2-channel down-mixed PCM (Pulse-Code Modulation)

signal for use with an external Dolby® Digital decoder or other external audio system with optical audio input.

If you have a DTS* decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded soundtracks on DVDs and audio CDs.

You will need:

•optical audio cable (Use an optical audio cable that has the larger “TosLink” connector and not the smaller “mini-optical” connector.)

To control the audio:

1Turn on the TV and the digital audio device.

2Press on the remote control and open the

Sound menu.

3Press or to select Audio Setup and then press .

5Press or to select either Dolby Digital or PCM, depending on your device.

( “Selecting the optical audio output format” on Page 41).

6To save the new settings, highlight Done and

then press .

To revert to the factory defaults, highlight Reset and then press .

Note:

•Some audio systems may not be compatible with Dolby Digital bitstream signals. Older audio systems that are not compatible with standard optical out signals may not work properly, creating a high noise level that may damage speakers or headphones.

THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY.

•The DIGITAL AUDIO OUT terminal may not output some digital audio sources because of copy restrictions.

*Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

**Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks and DTS Digital Out and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

4Press or to select Optical Output Format.

22