Toshiba 15CV100U, 32CV100U, 26CV100U, 22CV100U Using the PC settings feature, Setting the PC Audio

Chapter 6: Using the TV’s features

Using the PC settings feature

You can view an image from a PC on the TV screen. When a PC is connected to the TV’s PC IN terminal, you can use the PC Settings feature to make adjustments to the image. If the edges of the picture are cut off, readjust the Horizontal Position and Vertical Position. If the picture is affected by interference, readjust the Clock Phase and Sampling Clock.

1Repeatedly press to select PC input mode

( “Selecting the video input source to view” on Page 33).

2From the Setup menu, press or to select PC Settings and then press .

Note: If a PC is not connected or there is no PC input signal, this feature will be grayed out in the Setup menu.

3Press or to select the item you want to adjust.

4Press or to make the appropriate adjustments.

Note: The screen is disrupted momentarily when adjusting the PC settings. This is not a sign of malfunction.

Mode	Description
Horizontal	Moves the picture left/right. The
	adjustment range is within ±50
Position
	from center.*
Vertical	Moves the picture up/down. The
	adjustment range is within ±10
Position
	from center.*
	Helps to reduce noise and sharpen
Clock Phase	the picture. The adjustment range
	is within ±16 from center.*
	Helps to reduce noise and
Sampling	minimize periodic vertical stripes
Clock	on the screen.The adjustment
	range is within ±10 from center.*
	Highlight this item and then press
Auto Adjust	to get an optimum adjustment
	automatically.

*The default settings may vary depending on the input signal format.

Setting the PC Audio

This function allows you to output or mute the sound from your PC when connecting using the PC IN terminal and an analog RGB cable ( Page 23).

1From the Sound menu, press or to select Audio Setup and then press .

2Press or to select PC Audio and then press or to select No or Yes.

Yes: When viewing the PC input, the audio from the PC Audio input can be heard.

No: When viewing the PC input, there will be no audio.

Note: Because the PC and HDMI 1 inputs share the same set of analog audio inputs, the PC Audio menu setting influences the HDMI 1 Audio menu setting. If PC Audio is set to “No”, the HDMI 1 Audio setting changes to “Auto”. If PC Audio is set to “Yes”, the HDMI 1 Audio setting is set to “Digital” and is grayed out in the menu.

( “Setting the HDMITM audio mode” on Page 31.)

46