Toshiba 22CV100U, 32CV100U, 26CV100U Selecting the picture mode, Adjusting the picture quality

Chapter 6: Using the TV’s features

Adjusting the picture

Selecting the picture mode

You can select your desired picture settings from four different modes, as described below.

Mode	Picture Quality
Sports	Bright and dynamic picture (factory
	setting)
Standard	Standard picture settings (factory
	setting)
Movie	Lower contrast for darkened room
	(factory setting)
PC	Designed for viewing of PC tables
	and documents

Preference Your personal preferences

Note: PC mode is available for HDMI and PC inputs only (grayed out for other input sources).

1From the Picture menu, press or to select Mode and then press .

2Press or to select the picture mode you prefer and then press .

Note: The picture mode you select affects the current input only. You can select a different picture mode for each input.

Adjusting the picture quality

You can adjust the picture quality (Contrast, Backlight, DynaLight™, Brightness, Color, Tint, and Sharpness) to your personal preferences.

Selection	Pressing	Pressing
Contrast	lower	higher
Backlight*	darker	lighter
DynaLight**	On/Off	On/Off
Brightness	darker	lighter
Color	paler	deeper
Tint	reddish	greenish
Sharpness	softer	sharper

*Backlight

This feature adjusts the brightness of the entire screen. When in video mode and no signal is input, this will automatically be set to 0 (Settings are stored in memory).

**DynaLight

This function automatically strengthens the black coloring of dark areas in the video according to the level of darkness.

1From the Picture menu, press or to select Picture Settings and then press .

2Press or to select the picture quality you want to adjust (Contrast, Backlight, DynaLight, Brightness, Color, Tint, or Sharpness).

3Press or to adjust the setting, as described in the table above and then press .

4To save the new settings, highlight Done and

then press . You can use any of the picture modes ( “Selecting the picture mode” at left column) as a starting point for adjusting the picture settings.

To revert back to the base mode that you began adjusting the picture settings from, highlight Reset and then press .

The picture qualities you adjusted are automatically saved in the Preference mode ( “Selecting the picture mode” at left column) until Reset is selected.

38