Toshiba 26CV100U manual Displaying TV status information, Understanding the auto power off feature

Chapter 6: Using the TV’s features

Note: When you turn on the audio receiver, change its input source, or adjust the sound volume, the sound will be output from the audio receiver’s speakers even if TV Speakers has been selected. Turn the TV off and on again to output the sound from the TV speakers.

To set the REGZA-LINK®Setup:

1From the Setup menu, press or to select REGZA-LINK Setup and then press .

2Press or to select Enable REGZA- LINK and then press or to select On.

Note: If you select Enable REGZA-LINK Off, the other items will be grayed out.

3Press or to select the REGZA-LINK Setup item you want to use and then press or to select On or desired mode.

•TV Auto Input Switch: On/Off

•TV Auto Power: On/Off

•Device Auto Standby: On/Off

•Speaker Preference: TV Speakers/Audio Receiver

4To save the new settings, highlight Done and

then press .

To revert to the factory defaults, highlight Reset and then press .

Displaying TV status information

To display TV status information using

DISPLAY:

Press on the remote control.

The following information will display (if applicable):

•Current input (ANT/CABLE, Video, etc.)

•If ANT/CABLE is the current input, either “CABLE” (for cable TV) or “ANT” (for over- the-air broadcasts).

•Channel number (if in ANT/CABLE mode)

•Channel label (if set)

•Digital signal strength indicator (bar graph in lower right corner of box; for ATSC signal only)

•Stereo, Mono or SAP audio status (when HDMI input mode, Dolby Digital or PCM)

•Video resolution

•Aspect ratio of incoming video signal (4:3 or 16:9)

•V-Chip rating status

•GameTimer (if set)

To display more TV information:

Press on the remote control again.

The following additional information will display for off air digital channels (if applicable):

•Title

•Duration

•Detailed description

Note: The location of the banner can be moved to the top or bottom of the screen by pressing or while the DISPLAY is on- screen.

Understanding the auto power off feature

The TV will automatically turn itself off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its broadcast for the day. This feature functions in ANT/ CABLE mode only.

Understanding the last mode memory feature

If the power is cut off while you are viewing the TV, the Last Mode Memory feature automatically turns on the TV when the power is resupplied.

Note: If it’s possible, and you will be away from the TV for an extended period of time, you should unplug the power cord.

49