Toshiba 32CV100U, 26CV100U manual Using the remote control, Preparing the remote control for use

Chapter 3: Using the remote control

Preparing the remote control for use

The remote control can operate your TV/DVD and control the basic functions of connected audio/

video devices if you connect a REGZA-LINK®compatible audio receiver or playback device ( Page 47).

Installing the remote control batteries

1Remove the battery cover from the back of the remote control.

Squeeze tab and lift cover

2Install two AAA size batteries. Match the + and

– symbols on the batteries to the symbols on the battery compartment.

3Close the battery cover on the remote control until the tab snaps.

Caution: Batteries must not be exposed to excessive heat such as sunshine, fire or the like.

Note:

•Be sure to use AAA size batteries.

•Dispose of batteries in a designated disposal area.

•Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations.

•If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with new ones.

•When necessary to replace batteries in the remote control, always replace both batteries with new ones. Never mix battery types or use new and used batteries in combination.

•Always remove batteries from the remote control if they are dead or if the remote control is not to be used for an extended period of time. This will prevent battery acid from leaking into the battery compartment.

24