4. Operation
Control
Panel
Operation
To access the control panel functions, use the four buttons located underneath the display.
| Button |
|
| Function |
|
| <MENU> |
|
| Press to find an operation mode or |
|
|
|
| to back out of the current menu |
| |
|
|
|
| option |
|
| <DOWN> |
|
| Press to scroll down the list of |
|
|
|
| options or to find a lower value |
| |
|
|
|
|
| |
| <UP> |
|
| Press to scroll up the list of options |
|
|
|
| or to find a higher value |
| |
|
|
|
|
| |
| <ENT> |
|
| Press to activate a menu option or a |
|
|
|
| selected value |
| |
|
|
|
|
|
Menu
Branches
Changing Options on the Current Menu Branch
Changing Options on a Different Menu Branch
The menu structures of the Scorpion™ GBC 2.0/RGY products have seven branches, as follows:
•Auto/Sound (13 option)
•Laser Sky Color (4 options)
•Laser Sky Effect (1 option)
•Sound Sensitivity (10 options)
•DMX address (503 options)
•Slave (1 option)
•Reverse (2 options with two values each)
•The control panel will remember the last setting you programmed, even after you have turned the product off.
•In addition, the control panel will remember the last selected option from each menu branch.
To change an option on the same menu branch, do the following:
1.Press <MENU> once (the LED display will blink).
2.Press <UP> or <DOWN> until the desired menu option shows on the LED display.
3.Press <ENT> to accept the new option (the new option will show solid on the LED display).
To change an option on a different menu branch, you must exit the current branch.
1.Press <MENU> once (the LED display will blink).
2.Press <MENU> repeatedly until seeing the active option of the desired menu branch.
3.Press <UP> or <DOWN> until the desired menu option within the new menu branch shows on the LED display.
4.Press <ENT> to accept the new option (the new option will show solid on the LED display).
Page 12 of 52 | Scorpion™ GBC 2.0/RGY User Manual (Rev. 2 ML) |