Changing Settings
OUTPUT SETUP
Digital output setup is possible.
Audio output from the optical digital output jack and coaxial output jack of this unit can be changed. Digital output can be turned on or off with the 2/3 buttons.
Settings: ON* (Digital audio is output) OFF (Digital audio is not output)
The initial setting (set at the factory before shipping) has been set to ON.
÷In each setting explanation, the setup mode first explained is the initial setting (set when shipped from factory). (* is marked.)
OUTPUT |
|
STOP |
|
1 DIG.OUTPUT | DIG.OUTPUT |
MAIN | ON |
| |
| 1/2 |
MENU | EXIT | ENTER ENTER | RETURN |
Preparation
DIG. OUTPUT
Set output setup to the setting that suits the component connected.
÷Set to Dolby Digital for an AV amplifier compatible with DOLBY DIGITAL.
÷Set to 96KHz for an AV amplifier compatible with 96 KHz linear PCM.
÷Set to MPEG for an AV amplifier compatible with MPEG.
÷Set to ON for an AV amplifier compatible with DTS.
Note
Do not change the output setting if you are not sure which system your amplifier is compatible with.
1.DOLBY DIGITAL: This player lets you change the audio output via an optical digital output jack and a coaxial digital output jack. Selection of a DVD’s Dolby Digital audio (3- dimensional audio used in theaters etc.) or Linear PCM (same digital audio as that on CD) can be made.
Settings: DOLBY DIGITAL* (The Dolby Digital signal is output as is (when an amplifier with
DOLBY DIGITAL=PCM (Provides Linear PCM sound with both Dolby Digital and Linear PCM sources (when a regular amp or Dolby Pro Logic amp is used).)
2.LINEAR PCM: 96KHz: PCM audio discs with a 96KHz sampling frequency can be played back at the 96KHz high quality sound setting. 48KHz discs will be played back at 48KHz. 48KHz: Discs with a 96KHz sampling frequency can be played back at a compressed 48KHz with this setting. 48KHz discs will be played back at 48KHz.
÷When the audio sampling frequency recorded on the disc is set as desired, output will also be switched between analog/digital output at the same time.
÷Some 96 KHz DVDs are copy protected. With this kind of disc, no signal is output from the digital output terminal.
| Settings: 48KHz* |
| 96KHz |
3. MPEG: | When a decoder or amplifier that has an MPEG input jack is used, the audio output |
| from this unit’s digital output jacks can be changed. |
| Selection of a DVD’s MPEG or linear PCM signal can be made. |
| Settings: MPEG= PCM* (Output is in the linear PCM standard whether the signal |
| is an MPEG signal or a linear PCM compatible signal.) |
| MPEG: (MPEG signal is output as is. (When using an amplifier with a |
| |
4. DTS: | When using an amplifier that has a DTS input jack, the DTS signal can be set to be |
| output (ON) or not output (OFF) for DVDs that have been recorded with DTS signals. |
| Settings: OFF* (not Output) |
| ON (output DTS signals) |
STOP | OUTPUT |
| |
1 DOLBY DIGITAL | DOLBY DIGITAL | ||
MAIN | |||
2 LINEAR PCM | DOLBY DIGITAL | ||
SETUP | |||
3 MPEG |
| ||
|
| ||
| 4 DTS | 1/2 | |
|
|
MENU | EXIT | ENTER ENTER | PREV |
STOP | OUTPUT |
| |
1 DOLBY DIGITAL | LPCM | ||
MAIN | |||
2 LINEAR PCM | 48KHz | ||
SETUP | |||
3 MPEG |
| ||
|
| ||
| 4 DTS | 2/2 | |
|
|
MENU | EXIT | ENTER ENTER | PREV |
STOP | OUTPUT |
| |
1 DOLBY DIGITAL | MPEG | ||
MAIN | |||
2 LINEAR PCM | MPEG | ||
SETUP | |||
3 MPEG | =PCM | ||
| |||
| 4 DTS | 2/2 | |
|
|
MENU | EXIT | ENTER ENTER | PREV |
STOP | OUTPUT |
| |
1 DOLBY DIGITAL | DTS | ||
MAIN | |||
2 LINEAR PCM | OFF | ||
SETUP | |||
3 MPEG |
| ||
|
| ||
| 4 DTS | 2/2 | |
|
|
MENU | EXIT | ENTER ENTER | PREV |
OperationBasic
Setup
OperationDetailed
InformationOther
Changing Settings
35