Toshiba 37CV510U, 32CV510U manual Connecting an Hdmi or DVI device to the Hdmi input

Page 15

Chapter 2: Connecting your TV

Connecting an HDMI™ or DVI device to the HDMI input

The HDMI input on your TV receives digital audio and uncompressed digital video from an HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device.

This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) program material in digital form from EIA/CEA-861-D–compliant[1]consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).

The HDMI input can accept and display VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz), and 1080p (24Hz/60Hz) signal formats. For detailed signal specifications, see page 61.

Supported Audio format: Linear PCM, sampling rate 32/44.1/ 48 kHz

Note: To connect a PC to the HDMI input, see page 18.

To connect an HDMI device, you will need:

•one HDMI cable (type A connector) per HDMI device

–For proper operation, it is recommended that you use an

HDMI cable with the HDMI Logo ( ).

–To display an 1080p/60Hz signal format, you will need a High Speed HDMI cable. Conventional HDMI/DVI cable may not work properly.

–HDMI cable transfers both video and audio. Separate analog audio cables are not required (see illustration).

–See “Setting the HDMI™ audio mode” (- page 31).

TV upper back panel

TV right side panel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HDMI device

VIDEO

AUDIO

 

HDMI OUT

L

R

 

IN IN

OUT

LR

To view the HDMI device video:

Select the HDMI 1, HDMI 2, or HDMI 3 video input source on the TV.*

*To select the video input source, press INPUT on the remote control (- page 20). To program the TV remote control to operate other devices, see Chapter 3.

To connect a DVI device, you will need:

•one HDMI-to-DVI adapter cable (HDMI type A connector) per DVI device

–For proper operation, the length of an HDMI-to-DVI adapter cable should not exceed 9.8 ft (3m). The recommended length is 6.6 ft (2m).

•one pair of standard analog audio cables per DVI device

–An HDMI-to-DVI adapter cable transfers video only. Separate analog audio cables are required (see illustration).

–See “Setting the HDMI™ audio mode” (- page 31).

TV upper back panel

DVI device

VIDEO

AUDIO

DVI/HDCP

L

R

OUT

 

IN IN

 

 

OUT

L

R

Note: To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:

•When turning on your electronic components, turn on the TV first, and then the HDMI or DVI device.

•When turning off your electronic components, turn off the HDMI or DVI device first, and then the TV.

[1]EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high- definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 32CV510U 37CV510U Dear Customer Safety PrecautionsIssue Tune Into SafetyInstallation Important Safety InstructionsInstallation, Care, and Service Additional Safety PrecautionsCare ServiceRemoving the Pedestal Stand To Display your LCD TV using a Wall BracketChoosing a location for your LCD TV To Display your LCD TV on the included Pedestal StandPart Important notes about your LCD TVTrademark Information Contents Troubleshooting Introduction Features of your new TVTV front and side panel controls and connections Effective rangeGreen and Yellow LEDs Colorstream HD2/PC/HDMI 1 Audio TV back panel connectionsConnecting your TV Overview of cable typesAbout the connection illustrations To view the VCR To view the antenna or Cable signalYou will need To view basic and premium Cable channelsTo record a TV program while watching a DVD To view antenna or Cable channelsTo view the DVD player To view the VCR or view and record antenna channelsTo connect a DVI device, you will need Connecting an Hdmi or DVI device to the Hdmi inputTo connect an Hdmi device, you will need To view the Hdmi device videoBefore controlling the devices REGZA-LINK connectionTo control the audio Connecting an audio systemTo connect a PC to the Hdmi terminal on the TV Connecting a personal computer PCSignal To connect a PC to the PC in terminal on the TVIf you have a Toshiba device Using the remote controlPreparing the remote control for use Installing the remote control batteriesLearning about the remote control AUX Using the remote control to control your other devicesTo use your TV remote control to operate a VCR, set the Mode Select switch to AUXAUX 1 VCR Remote Control functional key chartProgramming the remote control to control your other devices DVD/VCR Combo Cable converter boxSatellite receiver TV/VCR ComboHtib Icon Setup/Installation menu layoutMenu layout and navigation Main menu layoutApplications Navigating the menu systemTo select the menu language Setting up your TVTo configure the ANT/CABLE input source Selecting the menu languageManually adding and deleting channels in the channel memory Programming channels automaticallyLabeling channels Mode To create and assign a custom labelTo delete the custom label Open the Channel Labeling windowSetting the time zone Viewing the digital signal meterSelecting the Power-On Mode Reset Factory DefaultsViewing the system status To select the video input source to view Using the TV’s featuresSelecting the video input source to view Labeling the video input sourcesTuning channels Tuning channels using Channel BrowserFavorites Browser Elements of the Channel Browser Adding and clearing channels and inputs in the History List Setting the Channel Tuning ModeTuning to the next programmed channel Tuning to a specific channel programmed or unprogrammedTo select the picture size using the menus Switching between two channels using Channel ReturnSwitching between two channels using SurfLock To select the picture size using the remote controlTheaterWide For letter box programs with subtitles Picture Size NaturalTheaterWide For 43 format programs TheaterWide For letter box programsTo turn off the auto aspect ratio feature Using the auto aspect ratio featureTo set the scroll settings To turn on the auto aspect ratio featureAdjusting the picture quality Using the Freeze featureAdjusting the picture Selecting the picture modeBase closed captions Using the TheaterLock featureUsing the closed caption mode Digital CC SettingsMuting the sound Adjusting the audioUsing the digital audio selector CC SelectorTo listen to stereo sound Adjusting the audio qualityTo adjust the audio quality Selecting stereo/SAP broadcastsIf you cannot remember your PIN code Using the Locks menuControl feature Entering the PIN codeTo block and unblock TV programs and movies Press b to highlight Enable Rating BlockingChanging your PIN code Blocking TV programs and movies by rating V-ChipUnlocking programs temporarily Blocking channelsTo lock the control panel Using the input lock featureUsing the control panel lock feature To lock/unlock the video inputsTo set the PC Audio Using the PC settings featureSetting the PC Audio To adjust the PC settingsSetting the sleep timer Using REGZA-LINKREGZA-LINK playback device HD DVD player, etc. control REGZA-LINK Player Control menu functions Volume and Mute controls of Audio ReceiverREGZA-LINK input source selection Other REGZA-LINK functionsUsing the Hdmi settings feature To set the REGZA-LINK SetupTo set the Hdmi Settings To display TV status information using Info Understanding the auto power off featureUnderstanding the last mode memory feature To display TV status information using RecallUsing the static gamma feature Using the TV’s advanced featuresUsing the advanced picture settings features Using dynamic contrastSelecting the color temperature Using CableClear digital noise reductionUsing Mpeg noise reduction Using the ColorMaster feature Using the Game Mode featureUsing Color Palette Adjustment General troubleshooting TroubleshootingRating blocking V-Chip problems Remote control problemsChannel tuning problems Closed caption problemsLED indications Appendix SpecificationsFormat Resolution Frequency Pixel Clock Frequency Acceptable signal formats for PC in and Hdmi terminalsFor LCD Televisions 26 and Larger Limited United States WarrantyFor Toshiba Brand Flat Panel Televisions Limited Canadian WarrantyDisclaimer and Limitation of Remedy Freeze Index08-02
Related manuals
Manual 5 pages 21.63 Kb
Top Page Image Contents