Toshiba 32CV510U, 37CV510U manual Using the auto aspect ratio feature, To set the scroll settings

Chapter 6: Using the TV’s features

Scrolling the TheaterWide® picture (TheaterWide 2 and 3 only)

You can set separate scroll settings for the TheaterWide 2 and TheaterWide 3 modes for each input.

To set the scroll settings:

1 Press Yand open the Video menu.

2 Highlight Theater Settings and press T.

Video

ModeSports

Picture Settings

Noise Reduction

ColorMaster

Game Mode Off

Theater Settings

TheaterLockOff

3 In the Picture Size field, select either TheaterWide 2 or TheaterWide 3 (you cannot scroll in any other mode).

4 Press b to highlight the Picture Scroll field.

5 Press C or c to scroll the picture up and down as needed, from –10 to +20.

6 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.

Using the auto aspect ratio feature

When the auto aspect ratio feature is set to On, the TV will automatically select the picture size when one of the following input sources is received:

•A 480i, 480p, 720p, 1080i digital signal from the ANT/ CABLE input

•A 480i signal from the Video 1 or Video 2 input

•A 480i, 480p, 720p, 1080i signal from the ColorStream HD1 or HD2 input

•A 480i, 480p, 720p, 1080i, 1080p, or VGA (60/72/75Hz) signal from the HDMI 1/2/3 input

Aspect ratio of	Automatic aspect size (automatically
signal source	selected when Auto Aspect is On)
4:3 normal	Natural (with sidebars)
4:3 letter box	TheaterWide 2
16:9 full	Full
Not defined
(no ID-1 data	The current picture size you set under
or HDMI	“Selecting the picture size” on page 38.
aspect data)

Note: The auto aspect ratio feature is not applicable to the PC input.

To turn on the auto aspect ratio feature:

1 From the Video menu, highlight Theater Settings and press T.

2 In the Auto Aspect Ratio field, select On.

3 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.

To turn off the auto aspect ratio feature:

Select Off in step 2 above.

40