Chapter 5: Setting up your TV
Viewing the digital signal meter
You can view the digital signal meter in the ANT/CABLE digital TV input source only.
To view the digital signal meter:
1 From the Setup menu, highlight Installation and press T. A new set of Installation menu icons will appear.
2 Open the Terrestrial menu, highlight Signal Meter, and press T.
3 Press BbC c to select the antenna input and digital channel whose signal you want to check. You can choose from Advanced or Basic signal meter.
Note:
•The physical digital channel number listed in the Signal Meter screen may not correspond to a virtual TV channel number. Contact your local broadcasters to obtain the RF channel numbers for your local digital stations.
•The signal strength does not change between virtual channels on the same physical channel.
To close the screen and return to the Terrestrial menu:
Highlight Done and press T.
To return to normal viewing:
Press O.
Setting the time zone
The Time Zone setup will allow you to specify the correct time zone for your region. This feature will allow the TV to show the correct time zone information and you can see it displaying the TV status information (- page 53).
To set the time zone:
1 From the Setup menu, highlight Installation and press T. A new set of Installation menu icons will appear.
2 Open the Time Zone menu, highlight Time Zone Setup, and press T.
3 Press B and C cto select the region, highlight Done, and then press T.
After the time zone has been set, you will be asked to set the current Daylight Saving Time status.
To set the Daylight Saving Time status:
1 Press B and C c to select Yes or No, highlight Done, and then press T.
32