Toshiba 32CV510U, 37CV510U manual Selecting stereo/SAP broadcasts, Adjusting the audio quality

In the Speakers field, select Off.

4 To save the new settings, highlight Done and press T. To reset the settings to the factory defaults, highlight Reset and press T.

Turning off the built-in speakers

You can use this feature to turn off the TV speakers when you connect an audio system to your TV (-“Connecting a digital audio system” and “Connecting an audio system” on page 17).

To turn off the built-in speakers:

In the MTS field, select Stereo.

Press C or c to adjust the level.

Chapter 6: Using the TV’s features

Selecting stereo/SAP broadcasts

The Multi-Channel TV Sound (MTS) feature allows you to output high-fidelity stereo sound. MTS also can transmit a Second Audio Program (SAP) containing a second language, music, or other audio information (when provided by individual stations).

When the TV receives a stereo or SAP broadcast, the word “STEREO” or “SAP” appears on-screen when Eis pressed. The MTS feature is only available for analog signals on the ANT/CABLE input (- page 53).

To listen to stereo sound:

1 From the Audio menu, highlight Audio Setup and press T.

2

3 To save the new settings, highlight Done and press T. To reset the settings to the factory defaults, highlight Reset and press T.

Note:

•You can typically leave the TV in Stereo mode because it will automatically output the type of sound being broadcast (stereo or monaural).

•If the stereo sound is noisy, select Mono to reduce the noise.

To listen to an alternate language on an ATSC digital station (if available):

Highlight the Language field in step 2 above, and then press C or c to select the language you prefer.

To listen to a second audio program on an analog station (if available):

Select SAP in step 2.

Note:

•A second audio program (SAP) can be heard only on those TV stations that offer it. For example, a station might broadcast another language as a second audio program. If you have SAP on, you will see the current program on the screen but hear the other language instead of the program’s normal audio.

•If you have SAP on and the station you are watching is not broadcasting a second audio program, the station’s normal audio will be output. However, occasionally there is no sound at all in SAP mode. If this happens, set the MTS feature to Stereo mode.

Adjusting the audio quality

You can adjust the audio quality by adjusting the bass, treble, and balance.

To adjust the audio quality:

1 From the Audio menu, highlight Audio Settings and press T.

2 Press b or B to highlight the item you want to adjust (Bass, Treble, or Balance).

3

•C makes the bass or treble weaker or increases the balance in the left channel (depending on the item selected).

•c makes the bass or treble stronger or increases the balance in the right channel (depending on the item selected).

1 From the Audio menu, highlight Audio Setup and press T.

2

3 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.

To turn on the built-in speakers:

Select On in step 2 above.

44