Toshiba 40E200U1 owner manual Setting the Hdmi audio mode, Viewing the digital signal meter

Chapter 5: Setting up your TV

4無 Highlight Done and press to save changes, and go back to the Channel Labeling window.

Setting the HDMI® audio mode

To set the HDMI audio mode:

1無 Press and open the Sound menu.

2無 Highlight Audio Setup and press .

3無 Press p or q to select HDMI 1 Audio and then press t or u to select the HDMI 1 audio mode (Auto, Digital, or Analog). (Auto is the recommended mode.) See “Connecting an HDMI or DVI device to the HDMI input” ( page 16).

Mode	Description
	When viewing the HDMI 1 input, if digital
	audio from the HDMI input is available,
Auto	it will be output. If not, the TV will
	automatically detect and output analog
	audio from the PC Audio input.
Digital	When viewing the HDMI 1 input, digital
	audio from the HDMI input will be output.
	When viewing the HDMI 1 input, analog
Analog	audio from the PC Audio input will be
	output.

4無 To save your settings, highlight Done and press .

Note: Because the PC and HDMI-1 inputs share the same set of analog audio inputs, the PC Audio menu setting influences the HDMI 1 Audio menu setting. If PC Audio is set to “No,” the HDMI 1 Audio setting changes to “Auto.” If PC Audio is set to “Yes,” the HDMI 1 Audio

setting is set to “Digital” and is grayed out in the menu. (Also see item 3 on page 12 and “Setting the PC Audio” on page 44.)

Viewing the digital signal meter

You can view the digital signal meter in the ANT/ CABLE digital TV input source only.

To view the digital signal meter:

1無 Press and open the Setup menu.

2無 Highlight Installation and press .

3無 A new set of Installation menu icons will appear. Open the Terrestrial menu, highlight Signal

Meter, and press .

4無 Press pqtu to select the antenna input and digital channel whose signal you want to check.

Note:

•The physical digital channel number listed in the Signal Meter screen may not correspond to a virtual TV channel number. Contact your local broadcasters to obtain the RF channel numbers for your local digital stations.

•The signal strength does not change between virtual channels on the same physical channel.

To close the screen and return to the Terrestrial menu:

Highlight Done and press .

To return to normal viewing:

Press .

Setting the time zone

The Time Zone setup will allow you to specify the correct time zone for your region. This feature will allow the TV status information to show the correct time zone information ( page 50).

To set the time zone:

1無 From the Setup menu, highlight Installation and

press . A new set of Installation menu icons will appear.

2無 Highlight Time Zone, and press .

3無 Press t or u to select the region, highlight Done, and then press .

After the time zone has been set, you will be asked to set the current Daylight Saving Time status.

(continued)

27

40E200U1_EN-2nd.indb 27

2010/3/9 下午 01:59:36