Toshiba 40E200U1 Using the PC settings feature, Setting the PC Audio, To unlock the control panel

Chapter 6: Using the TV’s features

5無 Press  to select On. When the control panel is locked and any button on the control panel (except POWER) is pressed, the message “NOT AVAILABLE” appears.

To unlock the control panel:

Select Off in step 5 above, or press and hold the VOLUME – button on the TV control panel for about 10 seconds until the volume icon appears.

Using the PC settings feature

You can view an image from a PC on the TV screen. When a PC is connected to the TV's PC IN terminal, you can use the PC Settings feature to

make adjustments to the image. If the edges of the picture are cut off, readjust the Horizontal Position and Vertical Position. If the picture is affected by interference, readjust the Clock Phase and Sampling Clock.

To adjust the PC settings:

1無 Repeatedly press to select PC input mode ( “Selecting the video input source to view” page 29).

2無 Press	and open the Setup menu.
3無 Highlight PC Settings and press		.

Note: If a PC is not connected or there is no pc input signal, this feature will be grayed out in the Setup menu.

4無 Press  or  to highlight the item you want to adjust.

5無 Press  or  to make the appropriate adjustments.

Note: The screen is disrupted momentarily when adjusting the PC settings. This is not a sign of malfunction.

Mode	Description
Horizontal	Moves the picture left/right.
	The adjustment range is within ±50 from
Position
	center.*
Vertical	Moves the picture up/down.
	The adjustment range is within ±10 from
Position
	center.*
	Helps to reduce noise and sharpen the
Clock	picture.
Phase	The adjustment range is within ±16 from
	center.*
	Helps to reduce noise and minimize
Sampling	periodic vertical stripes on the screen.
Clock	The adjustment range is within ±10 from
	center.*
Auto	Highlight this item then press
	to get an optimum adjustment
Adjust
	automatically.

** The default settings may vary depending on the input signal format.

Setting the PC Audio

This function allows you to output or mute the sound from your PC when connecting using the PC IN terminal and an analog RGB cable. ( page 18)

To set the PC Audio:

1無 Press	and open the Sound menu.
2無 Highlight Audio Setup and press		.

3無 Press  or  to select PC Audio and then press

or  to select No or Yes.

Yes: When viewing the PC input, the audio from the PC Audio input can be heard.

No: When viewing the PC input, there will be no audio.

Note: Because the PC and HDMI-1 inputs share the same set of analog audio inputs, the PC Audio menu setting influences the HDMI 1 Audio menu setting. If PC Audio

(continued)

44

40E200U1_EN-2nd.indb 44

2010/3/9 下午 02:00:00