Toshiba 40E200U1 owner manual Selecting stereo/SAP broadcasts, Adjusting the audio quality

Page 39

Chapter 6: Using the TV’s features

3Press or to select Audio, and then press or to select the desired service.

4Press .

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature allows you to output high-fidelity stereo sound. MTS also can transmit a second audio program (SAP) containing a second language, music, or other audio information (when provided by individual stations).

When the TV receives a stereo or SAP broadcast, the word “STEREO” or “SAP” appears on-screen when

is pressed.The MTS feature is only available for analog signals on the ANT/CABLE input.

To listen to stereo sound:

1Press and open the Sound menu.

2Highlight Audio Setup and press .

3In the MTS field, select Stereo.

4To save the new settings, highlight Done and

press .

To reset the settings to the factory defaults, highlight Reset and press .

Note:

•You can typically leave the TV in Stereo mode because it will automatically output the type of sound being broadcast (stereo or monaural).

•If the stereo sound is noisy, select Mono to reduce the noise.

To listen to an alternate language on an ATSC digital station (if available):

Highlight the Language field in step 3 above, and then press or to select the language you prefer.

To listen to a second audio program on an analog station (if available):

Select SAP in step 3 above.

Note:

•A second audio program (SAP) can be heard only on those TV stations that offer it. For example, a station might broadcast another language as a

second audio program. If you have SAP on, you will see the current program on the screen but hear the other language instead of the program’s normal audio.

•If you have SAP on and the station you are watching is not broadcasting a second audio program, the station’s normal audio will be output. However, occasionally there is no sound at all in SAP mode. If this happens, set the MTS feature to Stereo mode.

Adjusting the audio quality

You can adjust the audio quality by adjusting the bass, treble, and balance.

To adjust the audio quality:

1Press and open the Sound menu.

2Highlight Audio Settings and press .

3Press or to highlight the item you want to adjust (Bass, Treble, or Balance).

4Press or to adjust the level.

••makes the bass or treble weaker or increases the balance in the left channel (depending on the item selected).

••makes the bass or treble stronger or increases the balance in the right channel (depending on the item selected).

5To save the new settings, highlight Done and press

. To reset the settings to the factory defaults, highlight Reset and press .

Selecting the optical audio output format

You can use this feature to select the optical audio

output format when you connect a Dolby Digital decoder or other digital audio system to the Optical Audio Out terminal on the TV (see “Connecting a digital audio system” on page 18).

To select the optical audio output format:

1Press and open the Sound menu.

2Highlight Audio Setup and press .

3In the Optical Output Format field, select either Dolby Digital or PCM, depending on your device.

4To save the new settings, highlight Done and press

. To revert to the factory defaults, highlight Reset and press .

(continued)

39

40E200U1_EN-2nd.indb 39

2010/3/9 下午 01:59:54

Image 39
Contents 40E200U1 40E20U1 Dear Customer Safety PrecautionsInstallation Important Safety InstructionsAdditional Safety Precautions Installation, Care, and ServiceOn a bed, sofa, rug, or similar surface CareTo Display your LCD TV on the included Pedestal Stand ServiceTo Display your LCD TV using a Wall Bracket Choosing a location for your LCD TV40 TV Removing the Pedestal StandTrademark Information Important notes about yourContents QSound audio technologies  Features of your new TV1080p output resolution IntroductionIntroduction TV front and side panel controls and connections Left side panelTV top Control panel TV back panel connections Power CordConnecting your TV Overview of cable typesAbout the connection illustrations Connecting a VCR and antenna, Cable TV or Camcorder To record a TV program while watching a DVD To view antenna or Cable channelsTo view the DVD player To view the VCR or view and record antenna channelsOne pair of standard analog audio cables per DVI device To connect an Hdmi device, you will needTo view the Hdmi device video To connect a DVI device, you will needREGZA-LINKconnection Before controlling the devicesHdmi cables  To connect a PC to the PC in terminal on the TV Connecting a personal computer PCConnecting a digital audio system To control the audioSignal names for mini D-sub 15-pin connector Ground ReservedGround Sync Reserved Using the remote control Installing the remote control batteriesRemote control effective range 9無 Recall displays TV status information  Learning about the remote control13無 VOL + adjusts the volume level Buttons used for operating the TV only are described hereMenu layout and navigation Main menu layoutIcon Option System Information  Opens the System Information screen Setup/Installation menu layoutInput Configuration  Opens the Input Configuration menu Navigating the menu systemToshiba Logo LED Setting up your TVInitial Setup Selecting the menu languageTo program channels automatically Setting channel skipProgramming channels into the TV’s channel memory Programming channels automaticallyLabeling channels Setting the Hdmi audio mode Viewing the digital signal meterSetting the time zone Viewing the system status Reset Factory DefaultsTo select the video input source to view Using the TV’s featuresSelecting the video input source to view Labeling the video input sourcesTuning channels Tuning channels using Channel BrowserFavorites Browser To open the Channel Browser To tune to a channel or input in Browse modePress  or  on the remote control Elements of the ChannelBrowserAdding and clearing channels and inputs in the History List Setting the Channel Tuning ModeSelecting the picture size Tuning to the next programmed channelSwitching between two channels using SurfLock Switching between two channels using Channel ReturnTheaterWide For letter box programs with subtitles NaturalTheaterWide For 43 format programs TheaterWide For letter box programsDot by Dot For VGA, SVGA, XGA, WXGA, and Sxga sources only Using the auto aspect ratio featureTo set the scroll settings NativeSelecting the picture mode Selecting the cinema modeUsing the Freeze feature Adjusting the pictureBase closed captions Using the closed caption modeAdjusting the picture quality To adjust the picture qualityCC Selector Adjusting the audioDigital CC Settings Using the digital audio selectorAdjusting the audio quality Selecting stereo/SAP broadcastsSelecting the optical audio output format Changing your PIN code Using the Locks menuEntering the PIN code If you cannot remember your PIN code4無 Press  to highlight Enable Rating Blocking To block and unblock TV programs and moviesTo download the additional rating system if available To lock channels Locking channelsUnlocking programs temporarily Using the input lock featureUsing the GameTimer Using the control panel lock featureTo unlock the control panel Using the PC settings featureSetting the PC Audio To adjust the PC settingsTo open the Media Player Using the Media PlayerUsing the Media Player with USB To select the Auto Start functionPlaying music files Viewing photo filesSingle View SlideshowTo sort the folders and files To set the repeat modeDuring playback To close the Music PlayerSetting the sleep timer Using REGZA-LINKREGZA-LINKplayback device DVD player, etc. control Other REGZA-LINKfunctions Volume and Mute controls of Audio ReceiverTo set the REGZA-LINKSetup REGZA-LINKinput source selectionUnderstanding the auto power off feature Understanding the last mode memory featureDisplaying TV status information Using the static gamma feature Using the TV’s advanced featuresUsing the advanced picture settings features Using Dynamic ContrastUsing the Game Mode feature Using CableClear digital noise reductionUsing Mpeg noise reduction Using 1080p PC Mode3無 Highlight Advanced Audio Settings and press Using the advanced audio settings featuresUsing the QSound sound feature To adjust the QSound settingsGeneral troubleshooting TroubleshootingClosed caption problems Sound problemsRemote control problems Channel tuning problemsAppendix SpecificationsFormat Resolution Frequency Pixel Clock Frequency Acceptable signal formats for PC in and Hdmi terminalsPC in signal formats Hdmi signal formatsLimited United States Warranty for LCD Televisions How to Obtain Warranty ServiceRental Units Limited One 1 Year Warranty on Parts and Labour General Provisions Arbitration and Dispute ResolutionDisclaimer and Limitation of Remedy Critical ApplicationsHow to Obtain Warranty Services Toshiba America Consumer PRODUCTS, L.L.C