Chapter 6: Using the TV’s features
Tuning to the next programmed channel
To tune to the next programmed channel:
Press 
or 
on the remote control or TV control panel.
Note: This feature will not work unless you program channels into the TV’s channel memory ( page 25).
Tuning to a specific channel (programmed or unprogrammed)
Tuning analog channels:
Press the Channel Number
5, then 
.
Tuning digital channels:
Press the Channel Number (0–9) on the remote
control, followed by the dash (
) button and then the
channel 
.
Note: If a digital channel is not programmed— either through the automatic channel scan ( page 25) or the Channel add function ( page
the Channel Number and dash (
) on the remote control.
Switching between two channels using Channel Return
The Channel Return feature allows you to switch between two channels without entering an actual channel number each time.
1無 Select the first channel you want to view.
2無 Select a second channel using the Channel Number buttons (and the dash (
) button if selecting a digital channel).
3無 Press 
on the remote control. The previous
channel will display. Each time you press 
, the TV will switch back and forth between the last two channels that were tuned.
Note: If you press from a
Switching between two channels using SurfLock™
The SurfLock™ feature temporarily “memorizes” one
channel to the button, so you can return to that channel quickly from any other channel by pressing
. To memorize a channel to the 
button: 1無 Tune the TV to the channel you want to program
into the 
button.
2無 Press and hold 
for about 2 seconds until the message “Memorized” appears
The channel has been programmed to the 
button.
3無 You can then change channels repeatedly, and
when you press 
, the memorized channel will be tuned.
The TV will return to the memorized channel one
time only. Once you press and then change channels again, the CH RTN memory will be cleared
and the button will function as Channel Return, by switching back and forth between the last two channels that are tuned.This feature also works for external inputs.
Selecting the picture size
You can view many program formats in a variety of picture
2, TheaterWide 3, Full, 4:3 HD, Native, and Dot by Dot (available in PC Mode Only).
Note: The “picture size” illustrations are examples only. The format of the image (in any of the picture sizes) will vary depending on the format of the signal you are currently watching. Select the picture size that displays the current program the way that looks best to you.
You can save separate picture size preferences for each input on your TV.
To select the picture size using the remote control:
1無 Press 
on the remote control.
2無 While the Picture Size screen is open, you can do one of the following to select the desired picture size:
•Repeatedly press 
.
•Press the corresponding Number button
•Press or while the Picture Size screen is open.
(continued)
33
2010/3/9 下午 01:59:47