Toshiba 40E200U1 Using the auto aspect ratio feature, Native, To set the scroll settings

Chapter 6: Using the TV’s features

Picture Size

Native

(for 480i (HDMI), 480p (HDMI), 720p, 1080i, and 1080p signal programs)

•If receiving a 480i (HDMI), 480p (HDMI), 720p, 1080i, or 1080p signal program, Native mode scales the video to display the entire picture within the borders of the screen (i.e. no overscanning).

•This is especially useful for external HD sources such as DVHS movies, or PC graphics.

Note:

••This mode is supported only for HDMI (1080p,1080i, 720p, 480p, and 480i), ColorStream (1080i and 720p), and ANT/ CABLE (digital) inputs (1080p,1080i, and 720p).

••Depending on the input signals, the border of the picture may be hidden, displayed in black, or noisy.

Dot by Dot

(for VGA, SVGA, XGA, WXGA, and SXGA sources only)

The “Dot by Dot” picture is non-scaling display. Depending on the input signal formats, picture is displayed with sidebars and/or bars at the top and bottom. (Example: VGA input source)

** To view the hidden areas (such as subtitles or captions), see below “Scrolling the TheaterWide® picture”.

Scrolling the TheaterWide® picture (TheaterWide 2 and 3 only)

You can set separate scroll settings for the TheaterWide 2 and TheaterWide 3 modes for each input.

To set the scroll settings:

1無 Press and open the Picture menu.

2無 Highlight Theater Settings and press .

3無 In the Picture Size field, select either TheaterWide

2or TheaterWide 3 (you cannot scroll in any other mode).

4無 Press  to highlight the Picture Scroll field.

5無 Press  or  to scroll the picture up and down as needed.

6無 To save the new settings, highlight Done and press . To revert to the factory defaults, highlight Reset and press .

Note: When receiving a signal at 480i resolution, the picture scroll function may have limited adjustment range.

Using the auto aspect ratio feature

When the auto aspect ratio feature is set to On, the TV will automatically select the picture size when one of the following input sources is received:

•A 480i, 480p, 720p, 1080i digital signal from the

ANT/CABLE input

•A 480i signal from the VIDEO 1 or VIDEO 2 input

•A 480i signal from the ColorStream HD input

•A 480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz) signal from the HDMI 1/2/3/4 input

Aspect ratio of	Automatic aspect size
	(automatically selected when
signal source
	Auto Aspect is On)
4:3 normal	Natural (with sidebars)
4:3 letter box	TheaterWide 2
16:9 full	Full
Not defined (no	The current picture size you
ID-1 data or	set under “Selecting the
HDMI aspect data)	picture size” on page 33.

Note: The auto aspect ratio feature is not applicable to PC input.

(continued)

35

40E200U1_EN-2nd.indb 35

2010/3/9 下午 01:59:50