Toshiba 42LX177 Connecting an Hdmi or DVI device to the Hdmi input, To view the Hdmi device video

Page 20

Chapter 2: Connecting your TV

Connecting an HDMI™ or DVI device to the HDMI input

The HDMI input on your TV receives digital audio and uncompressed digital video from an HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device.

This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) program material in digital form from EIA/CEA-861-D–compliant[1]consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).

The HDMI input can accept and display VGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz), and 1080p (24Hz/ 60Hz) signal formats. For detailed signal specifications, see page 109.

Note:

•Some of legacy HDMI sources may not work properly with your latest HDMI TV, due to new standard adoption. Please try to set Off the following three options (Lip-Sync Latency, Deep Color, xvYCC). Your legacy HDMI source should operate properly with your TV. See page 75.

•Supported Audio format : Linear PCM, sampling rate 32/ 44.1/48kHz

To connect an HDMI device, you will need:

•one HDMI cable (type A connector) per HDMI device

–For proper operation, it is recommended that you use an

HDMI cable with the HDMI Logo ( ).

–If your HDMI connection is capable of 1080p and/or your TV is capable of refresh rates greater than 60Hz or supports Deep Color™, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly with this mode.

–HDMI cable transfers both video and audio. Separate analog audio cables are not required (see illustration).

–See “Setting the HDMI™ audio mode” (- page 48).

TV lower back panel

HDMI device

VIDEO

AUDIO

 

HDMI OUT

L

R

 

IN IN

OUT

LR

To view the HDMI device video:

Select the HDMI 1, HDMI 2, or HDMI 3 video input source on the TV.*

*To select the video input source, press INPUT on the remote control (- page 27). To program the TV remote control to operate other devices, see Chapter 3.

To connect a DVI device, you will need:

•one HDMI-to-DVI adapter cable (HDMI type A connector) per DVI device

–For proper operation, the length of an HDMI-to-DVI adapter cable should not exceed 9.8 ft (3m). The recommended length is 6.6 ft (2m).

•one pair of standard analog audio cables per DVI device

–An HDMI-to-DVI adapter cable transfers video only. Separate analog audio cables are required (see illustration).

–See “Setting the HDMI™ audio mode” (- page 48).

TV upper back panel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TV lower back panel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVI device

VIDEO

AUDIO

DVI/HDCP

L

R

OUT

 

IN IN

 

 

OUT

L

R

Note: To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:

•When turning on your electronic components, turn on the TV first, and then the HDMI or DVI device.

•When turning off your electronic components, turn off the HDMI or DVI device first, and then the TV.

[1]EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high- definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents 42LX177 46LX177 52LX177 57LX177 Safety Precautions Dear CustomerImportant Safety Instructions Installation, Care, and ServiceAdditional Safety Precautions InstallationService CareTo Display your LCD TV using a Wall Bracket Choosing a location for your LCD TVTo Display your LCD TV on the included Pedestal Stand Removing the Pedestal StandTrademark Information PartImportant notes about your LCD TV Contents Troubleshooting Welcome to Toshiba Features of your new TVIntroduction Introduction TV front and side panel controls and connections Green and Yellow LEDsTV back panel connections ColorStream HD-1 and ColorStream HD-2Thinc system Toshiba Home Interactive Network Connection About the connection illustrations Connecting your TVOverview of cable types Connecting a VCR and antenna or Cable TV no Cable box To view the antenna or Cable signalYou will need To view the VCRConnecting a VCR with S-video and a cable box To view basic and premium Cable channelsCoaxial cables Video cable Standard audio cablesTo view antenna or Cable channels To view the DVD playerTo view the VCR or view and record antenna channels To record a TV program while watching a DVDIf you cannot locate the device’s infrared sensor To connect the IR blaster cableTo control the devices Connecting a camcorder To view the camcorder videoIR cable Select the Video 2 video input source on the TVConnecting an Hdmi or DVI device to the Hdmi input To connect an Hdmi device, you will needTo view the Hdmi device video To connect a DVI device, you will needThree Hdmi cables CE-Link connectionBefore controlling the devices Connecting an audio system To control the audioTo connect a PC to the Hdmi terminal on the TV Connecting a personal computer PCTo connect a PC to the PC in terminal on the TV Connecting a home network Hub or switchFile sharing Personal E-mailRouter/switch1 Modem DSL or cable2 Coaxial or telephone cable depending on your modemUsing the remote control Installing the remote control batteriesRemote control effective range To install the remote control batteriesLearning about the remote control TheaterWide 1/2/3, Full, 43 HD, and Native Satellite DVD Remote Control functional key chartCombo Receiver CH RTN Using the remote control to operate your other devices Device code setupMode Select Default device mode control before programming Mode Select Device mode control after programmingUsing the volume lock feature Operational feature resetTo unlock the remote control’s volume keys To reset the remote controlSatellite receivers TVsCable boxes DVDs 3D LABDVD/VCR Combo VCRsKEC STS PVRs Cable/PVR ComboDBS/PVR Combo Audio AmpAudio Amp/Tuners SAEIcon Option Menu layout and navigationMain menu layout Setup/Installation menu layout Setup menuInstallation Thinc menuNavigating the menu system VideoSelecting the menu language Setting up your TVSetting the Demo Mode To program channels automatically To configure the ANT input sourceProgramming channels automatically Manually adding and deleting channels in the channel memory Setting the Auto Input feature To reset Auto InputTo set the Auto Input To turn off the Auto InputLabeling channels To assign channel labelsTo remove channel labels To create and assign a custom labelSetting the Hdmi audio mode To set the Hdmi audio modeTo delete the custom label Open the Channel Labeling windowViewing the system status Viewing the digital signal meterReset Factory Defaults Selecting the Power-On Mode Selecting the Demo ModeTo cancel the reset To set the Power-On Mode featureUsing the TV’s features Press CABLE/SAT, DVD, VCR/PVR, AUX1, AUX2To clear the input labels Input labeling exampleTo label the video input sources Tuning channels Tuning channels using Channel BrowserFavorites Browser Picture PreviewElements of the Channel Browser Adding and clearing channels and inputs in the History ListSwitching between two channels using SurfLock Tuning to a specific channel programmed or unprogrammedSwitching between two channels using Channel Return Selecting the picture size Natural picture sizeTheaterWide 1 picture size for 43 format programs TheaterWide 2 picture size for letter box programsFull picture size for 169 480i, 480p source programs only Using the auto aspect ratio feature To set the scroll settingsTo turn on the auto aspect ratio feature To turn off the auto aspect ratio featureUsing the Freeze feature Using the POP featuresUsing the POP double-window feature To use the Freeze featureAdjusting the picture Selecting the picture modeTo select the picture mode Mode Picture QualityUsing the TheaterLock feature Adjusting the picture qualityTo adjust the picture quality To turn on TheaterLockUsing the closed caption mode Base closed captionsTo view captions or text Highlight T1, T2, T3, or T4CC Selector Digital CC SettingsUsing the Closed Caption button on the remote control Adjusting the audio Using the digital audio selectorMuting the sound Selecting stereo/SAP broadcastsAdjusting the audio quality Using the StableSound featureTo adjust the audio quality To turn on the StableSound featureUsing the Dolby Digital Dynamic Range Control feature Turning off the built-in speakersUsing the Locks menu Entering the PIN codeIf you cannot remember your PIN code Changing your PIN codePress b to highlight Enable Rating Blocking Blocking TV programs and movies by rating V-ChipTo block and unblock TV programs and movies To download the additional rating system if availableTo unblock individual channels Blocking channelsTo block channels Using the input lock feature Unlocking programs temporarilyUsing the GameTimer To set the GameTimer To lock the control panelTo cancel the GameTimer To unlock the control panel Highlight Off in above, or press and holdUsing the PC settings feature Setting the PC AudioTo adjust the PC settings To set the PC AudioCE-Link playback device HD DVD player, etc. control Setting the sleep timerUsing CE-Link CE-Link Player Control menu functions CE-Link input source selectionOther CE-Link functions To set the Hdmi Settings Using the Hdmi settings featureTo set the CE-Link Setup Understanding the auto power off feature Understanding the last mode memory featureTo display TV status information using Recall To display TV status information using InfoUsing the TV’s advanced features Using the advanced picture settings featuresUsing dynamic contrast Using the static gamma featureSelecting the color temperature Using the Vertical Edge Enhancer featureTo select the color temperature To turn on the Vertical Edge Enhancer featureSelecting the cinema mode 480i and 1080i signals Using the ClearFrame featureTo set the Cinema Mode to Film To set the Cinema Mode to VideoUsing the Film Stabilization feature Using CableClear digital noise reductionTo change the CableClear settings CableClear field, select your desired settingUsing Color Palette Adjustment Using Mpeg noise reductionUsing the ColorMaster Pro feature To create a User Colors Repeat for other items Press OUsing xvYCC Selection feature Using the Game Mode featureUsing the advanced audio settings features Using the SRS WOW surround sound featureTo adjust the WOW settings To turn on the Dolby Virtual and SRS TruSurround featureHelp Subgroups Using the Help featureHelp Main Menu Specific Help Items Operational ItemsUsing the Thinc home network feature Connecting the TV to your home networkFile sharing Personal E-mailAutomatically setting up the network address To set up the network addressBasic Network Setup menu appears Either… Highlight OK and press TOn your PC Resetting the network addressCompatible operating systems Go to section D, Setting up file sharing on the TV, on Permissions window for the selected folderProperties window for the selected folder Properties windowSetting up file sharing on the TV Or MP3 Music DirectoryUsing the software keyboard About the Software Upgrade featureTo enter text using the software keyboard Home NetworkMedia specifications File/folder name specificationsPicture Viewer/JPEG file specifications Audio Player/MP3 file specificationsUsing the Picture Viewer Networked PC specificationsAccessing Jpeg files stored on a networked PC Maximum number of files per shared folderViewing Jpeg files on the TV During the slide showTo set the slide show interval To close the Picture ViewerUsing the Audio Player To adjust or mute the volumePlaying MP3 files stored on a networked PC During playbackSetting up the Personal E-mail feature Required information and servicesSetting up Personal E-mail Highlight Personal E-mail Setup and press T100 Highlight the E-mail Account Setup field, and press TE-mail Account Setup window appears illustrated below Setup window Description of fields in the E-mail AccountUsing the Personal E-mail feature Unread E-mail NotificationMail Inbox Elements of the Inbox103 Read ViewTo read e-mail 104 TroubleshootingGeneral troubleshooting 105 Home network troubleshooting Audio Player problemsPicture Viewer problems Basic network setup problemsHome server setup problems Personal E-mail problems107 Depending on the type of HTML, some images may not display108 LED Indication Condition SolutionLED indications Specifications Format Resolution Frequency Pixel Clock FrequencyAppendix 109110 Appendix111 Limited United States WarrantyFor LCD Televisions 26 and Larger 112 Limited Canadian WarrantyFor Toshiba Brand Flat Panel Televisions 113 Disclaimer and Limitation of Remedy114 Index 115116 109117 07-05
Top Page Image Contents