Using the TheaterLock feature | Toshiba 42LX177 instruction

Chapter 6: Using the TV’s features

Adjusting the picture quality

You can adjust the picture quality (Contrast, Back Light, DynaLight™, Brightness, Color, Tint, and Sharpness) to your personal preferences.

Selection	Pressing C	Pressing c
Contrast	lower	higher

Back Light*	darker	lighter

DynaLight**	On/Off	On/Off

Brightness	darker	lighter

Color	paler	deeper

Tint	reddish	greenish

Sharpness	softer	sharper

*Back Light

This feature adjusts the brightness of the entire screen. When in video mode and no signal is input, this will automatically be set to 0. (Settings are stored in memory.)

**DynaLight

This function automatically strengthens the black coloring of dark areas in the video according to the level of darkness.

To adjust the picture quality:

1 Press Yand open the Video menu.

2 Highlight Picture Settings and press T.

3 Press B or b to select the picture quality you want to adjust (Contrast, Back Light, DynaLight, Brightness, Color, Tint, or Sharpness), and then press C or c to adjust the setting, as described in the table above.

Picture Settings			Mode: Sports
	Contrast	100

	Back Light	100
	DynaLight		On

	Brightness	50

	Color	50

	Tint	0

	Sharpness	50

Advanced Picture Settings

ResetDone

Contrast70

4 To save the new settings, highlight Done and press T. You can use any of the picture modes (- “Selecting the picture mode,” on the previous page) as a starting point for adjusting the picture settings.

To revert back to the base mode that you began adjusting the picture settings from, highlight Reset and press T.

Note:

•If you select a picture mode other than Pro 1 or Pro 2, the picture qualities you adjusted are automatically saved in the Preference mode (- “Selecting the picture mode,” on the previous page).

•If you select picture mode Pro 1 (or Pro 2) and then change a picture quality setting, those values are saved in picture mode Pro 1 (or Pro 2).