Toshiba 42LX177 manual CE-Link input source selection, Other CE-Link functions

Chapter 6: Using the TV’s features

CE-Link Player Control menu functions:

1 Press Cand open the THINC Applications menu.

2 Press B or b to highlight CE-Link Player Control and press T.

THINC Applications

CE-Link Player Control

Picture Viewer

Audio Player

Personal E-mail

Channel Browser CB

Favorites Browser

3 Press B or b to select the item you want to control and press T.

CE-Link Player Control
Recorder		Power
	Top Menu
	Menu
Contents Menu
Navigate	ENTER Select	EXIT Exit

–POWER turns the selected device on and off.

–Top Menu accesses the top menu of a DVD.

–Menu accesses the menu of a DVD.

–Contents Menu accesses the contents list when you press T. At this time, the CE-Link Player Control menu will disappear.

Note:

•These functions depend on the devices that are connected.

•The CE-Link Player Control item will be grayed out in the following conditions:

-A non-HDMI input is currently selected.

-The Enable CE-Linkitem is set to Off.

-The connected device is not a playback or recording device.

CE-Link input source selection

If a CE-Link device with HDMI switching capability (e.g. Audio Receiver) is connected to the HDMI input, you can select another CE-Link device that is connected to the master HDMI device using the TV’s INPUT button. See page 51 for details.

Audio Receiver VOLUME and MUTE control

With your TV’s remote control, you can adjust or mute the sound volume of the speakers connected to the TV via an audio receiver. First, select TV mode by pressing the TV button under MODE SELECT on the remote control.

•zZadjust the volume level.

•Wturns off the sound.

Note:

•To use this function:

-Set Speaker Preference to Audio Receiver in the CE- Link Setup menu.

-Confirm that a connected CE-Link device (such as HD DVD player, etc) is selected for the Audio Receiver input source.

•You can also use this function when the audio receiver is connected to the TV’s DIGITAL AUDIO OUT terminal (not HDMI connection). In this case, select a digital audio input mode on the Audio Receiver.

•These functions depend on the device connected.

Other CE-Link functions

When the Enable CE-Linkis set to On, the following functions can be enabled by setting them to On.

•TV Auto Input Switch

If a connected HDMI device starts playing video or audio, the TV will automatically switch to the appropriate HDMI input.

•TV Auto Power

If a CE-Link device is turned on or off, the TV turns on or off automatically.

•Device Auto Standby

If the TV is turned off, the TV will send a message to turn off all of the CE-Link devices connected to the TV.

•Speaker Preference

From this item, you can set your audio output preference to the TV speakers or the audio receiver speakers. When this item is set to Audio Receiver, the TV remote can be used to adjust or mute the volume of the audio. This item will be grayed out unless a CE-Link compatible audio receiver is connected.

Note: When you turn on the Audio Receiver, change its input source, or adjust the sound volume, the sound will be output from the audio receiver’s speakers even if TV Speakers has been selected. Turn the TV off and on again to output the sound from the TV Speakers.

74