Toshiba 40RF350U manual Selecting the Blue LED Illumination level, Selecting the Power-On Mode

Chapter 5: Setting up your TV

6 Highlight Yes and press T. The TV will turn off automatically after a few seconds. After the TV turns off, unplug the TV power cord and then plug it in again to complete the reset process.

System Information

Press YES to confirm. After the TV turns off, unplug it and plug it back in to complete the reset.

NoYes

To cancel the reset:

Highlight No and press T.

Selecting the Blue LED Illumination level

You can adjust the brightness of the blue LED located on the front panel (High, Middle, or Low).

To set the Blue LED Illumination level:

1 Press Y, and open the Setup menu.

2 Highlight Blue LED Illumination and press c.

3 Press B or b to select your desired illumination level.

Setup

Installation
CE-Link Setup
Sleep Timer
HDMI Settings
PC Settings
Blue LED Illumination	High	High
Power-On Mode Power-Saving		Middle
		Low

Selecting the Power-On Mode

You can select either Power-Savingor Fast mode.

•Power-Savingmode keeps power consumption in standby mode to below 3W. As a result, it takes a bit longer for the TV to turn on.

•Fast mode increases power consumption in standby mode. As a result, the TV will turn on more quickly. While in Fast mode, the yellow LED on the front of the TV will be lit.

To set the Power-On Mode feature:

1	Press Y, and open the Setup menu.
2	Highlight Power-On Mode and press c.
3	Press Bor bto select either Power-Savingor Fast and
	press T.
		Setup
		Installation
		CE-Link Setup
		Sleep Timer
		HDMI Settings
		PC Settings
		Blue LED Illumination High
		Power-On Mode Power-Saving	Power-Saving
			Fast

45