Toshiba 40RF350U manual Appendix, Specifications

Page 78

Chapter 9: Appendix

Specifications

Note:

•This model complies with the specifications listed below.

•Designs and specifications are subject to change without notice.

•This model may not be compatible with features and/or specifications that may be added in the future.

Television System

NTSC standard

ATSC standard (8VSB)

Digital Cable (64 QAM, 256 QAM; in-the-clear, unencrypted)

Channel Coverage

VHF: 2 through 13

UHF: 14 through 69

Cable TV: Mid band (A-8 through A-1, A through I) Super band (J through W)

Hyper band (AA through ZZ, AAA, BBB) Ultra band (65 through 94, 100 through 135)

Power Source: 120 V AC, 60 Hz

Power Consumption

40RF350U: 175 W (average)

0.6W in standby mode

46RF350U: 199 W (average)

0.4W in standby mode

Audio Power: 10 W + 10 W

Speaker Type

Two 4 inches (100 mm) round

Video/Audio Terminals

S-VIDEO INPUT:

Y:1 V(p-p), 75 ohm, negative sync.

C:0.286 V(p-p) (burst signal), 75 ohm

VIDEO/AUDIO INPUT:

VIDEO: 1 V(p-p), 75 ohm, negative sync.

AUDIO: 150 mV(rms) (30% modulation equivalent, 22 k ohm or greater)

ColorStream® (component video) HD INPUT: VIDEO:Y: 1V(p-p), 75 ohm

PR: 0.7 V(p-p), 75 ohm

PB: 0.7 V(p-p), 75 ohm

Suggested formats: 1080i, 720p, 480p, 480i AUDIO: 150 mV(rms), 22 k ohm or greater

HDMI™ INPUT:

HDMI compliant (type A connector) HDCP compliant

Audio Lip Sync supported

Suggested formats: See table on the next page.

HDMI Audio: 2-channel Linear-PCM; 32/44.1/48 kHz sampling frequency; 16/20/24 bits per sample

FIXED AUDIO OUTPUT:

150 mv (rms) (30% modulation equivalent, 2.2 k ohm or less)

DIGITAL AUDIO OUTPUT:

Optical type

IR OUT:

3 V(p-p), 3.5 mm mono socket

PC INPUT:

15-Pin D-sub Analog RGB

Dimensions

40RF350U: Width: 36-7/8 inches (934 mm) Height: 25 inches (632 mm) Depth: 12 inches (302 mm)

46RF350U: Width: 42-1/4 inches (1,070 mm) Height: 28-1/8 inches (713 mm) Depth: 12 inches (302 mm)

Mass (weight)

40RF350U: 59.1 lbs (26.8 kg)

46RF350U: 75.2 lbs (34.1 kg)

Operating conditions

Temperature: 32ºF - 95ºF (0ºC - 35ºC)

Humidity: 20 - 80% (no moisture condensation)

Supplied Accessories

•Remote control with two size “AA” alkaline batteries

•Owner’s manual (this book)

•Lead clip

Use this clip to attach the TV to a wall, pillar, or other immovable structure. See item 20 on page 3.

•Cleaning cloth (to clean the cabinet and control panel)

78

Image 78

Contents 40RF350U 46RF350U Safety Precautions Dear CustomerAdditional Safety Precautions Important Safety InstructionsInstallation, Care, and Service InstallationService CareTo Display your LCD TV on the included Pedestal Stand To Display your LCD TV using a Wall BracketChoosing a location for your LCD TV Removing the Pedestal StandPart Important notes about your LCD TVTrademark Information Contents Troubleshooting Features of your new TV IntroductionWelcome to Toshiba Introduction TV front and side panel controls and connections Green and Yellow LEDsTV back panel connections ColorStream HD-1 and ColorStream HD-2Connecting your TV Overview of cable typesAbout the connection illustrations You will need Connecting a VCR and antenna or Cable TV no Cable boxTo view the antenna or Cable signal To view the VCRCoaxial cables Video cable Connecting a VCR with S-video and a cable boxTo view basic and premium Cable channels Standard audio cablesTo view the VCR or view and record antenna channels To view antenna or Cable channelsTo view the DVD player To record a TV program while watching a DVDTo connect the IR blaster cable To control the devicesIf you cannot locate the device’s infrared sensor Connecting a camcorder To view the camcorder videoSelect the Video 2 video input source on the TV To view the Hdmi device video Connecting an Hdmi or DVI device to the Hdmi inputTo connect an Hdmi device, you will need To connect a DVI device, you will needBefore controlling the devices For the setup shown above, you will needCE-Link connection Three Hdmi cablesConnecting an audio system To control the audioTo connect a PC to the PC in terminal on the TV Connecting a personal computer PCSignal To connect a PC to the Hdmi terminal on the TVRemote control effective range Using the remote controlInstalling the remote control batteries To install the remote control batteriesLearning about the remote control TheaterWide 1/2/3, Full, 43 HD, and NativeRemote Control functional key chart Combo ReceiverSatellite DVD CH RTN Mode Select Default device mode control before programming Using the remote control to operate your other devicesDevice code setup Mode Select Device mode control after programmingTo unlock the remote control’s volume keys Using the volume lock featureOperational feature reset To reset the remote controlTVs Cable boxesSatellite receivers DVDs 3D LABDVD/VCR Combo VCRsKEC STS DBS/PVR Combo PVRsCable/PVR Combo Audio AmpAudio Amp/Tuners SAEMenu layout and navigation Main menu layoutIcon Option Installation Setup/Installation menu layoutSetup menu Thinc menuNavigating the menu system VideoSelecting the menu language Setting up your TVTo configure the ANT input source To select the menu languageTo program channels automatically Programming channels automaticallyManually adding and deleting channels in the channel memory To add or delete channels in the channel memorySetting the Auto Input feature To turn off the Auto Input To reset Auto InputLabeling channels To assign channel labelsTo remove channel labels Setting the Hdmi audio modeTo set the Hdmi audio mode To delete the custom labelViewing the digital signal meter Reset Factory DefaultsViewing the system status To set the Power-On Mode feature Selecting the Power-On ModeTo cancel the reset Selecting the Blue LED Illumination levelUsing the TV’s features Press CABLE/SAT, DVD, or VCR/PVRInput labeling example To label the video input sourcesTo clear the input labels Tuning channels Tuning channels using Channel BrowserFavorites Browser Setting the Channel Tuning Mode Elements of the Channel BrowserAdding and clearing channels and inputs in the History List Switching between two channels using SurfLock Tuning to a specific channel programmed or unprogrammedSwitching between two channels using Channel Return To set the Channel Tuning ModeTheaterWide 1 picture size for 43 format programs Selecting the picture sizeNatural picture size TheaterWide 2 picture size for letter box programsFull picture size for 169 480i, 480p source programs only To turn on the auto aspect ratio feature Using the auto aspect ratio featureTo set the scroll settings To turn off the auto aspect ratio featureUsing the Freeze feature Adjusting the pictureSelecting the picture mode To adjust the picture quality Using the TheaterLock featureAdjusting the picture quality To turn on TheaterLockBase closed captions Using the closed caption modeDigital CC Settings To view captions or textUsing the digital audio selector Adjusting the audioUsing the Closed Caption button on the remote control CC SelectorTo listen to stereo sound Press C or c to adjust the levelSelecting stereo/SAP broadcasts MTS field, select StereoUsing the StableSound feature Using the Dolby Digital Dynamic Range Control featureIf you cannot remember your PIN code Using the Locks menuEntering the PIN code Changing your PIN codeTo block and unblock TV programs and movies Press b to highlight Enable Rating BlockingBlocking TV programs and movies by rating V-Chip To download the additional rating system if availableBlocking channels To block channelsTo unblock individual channels Using the input lock feature Unlocking programs temporarilyUsing the GameTimer Using the control panel lock featureTo adjust the PC settings Using the PC settings featureSetting the PC Audio To set the PC AudioSetting the sleep timer Using CE-LinkCE-Link playback device HD DVD player, etc. control CE-Link input source selection Other CE-Link functionsCE-Link Player Control menu functions Using the Hdmi settings feature To set the CE-Link SetupTo set the Hdmi Settings To display TV status information using Recall Understanding the auto power off featureUnderstanding the last mode memory feature To display TV status information using InfoUsing dynamic contrast Using the TV’s advanced featuresUsing the advanced picture settings features Using the static gamma featureTo select the color temperature Selecting the color temperatureUsing CableClear digital noise reduction To change the CableClear settingsUsing Mpeg noise reduction Using the ColorMaster featureUsing Color Palette Adjustment To change the xvYCC Selection Using the xvYCC Selection featureTo reset ColorMaster to its factory settings Press Rto return to the previous menuWOW SRS 3D To turn the surround sound effect Using the Game Mode featureTo turn on Game Mode On or OffTroubleshooting General troubleshootingRating blocking V-Chip problems Channel tuning problemsClosed caption problems Hdmi problemsLED Indication Condition Solution LED indicationsSpecifications AppendixAcceptable signal formats for PC in and Hdmi terminals Format Resolution Frequency Pixel Clock Frequency1280 60.020Hz 63.981kHz 108.000MHz Limited United States Warranty For LCD Televisions 26 and LargerLimited Canadian Warranty For Toshiba Brand Flat Panel TelevisionsDisclaimer and Limitation of Remedy Appendix Index FreezeWowsrs 3D 07-08