Toshiba 40RF350U manual Using the auto aspect ratio feature, To set the scroll settings

Chapter 6: Using the TV’s features

Scrolling the TheaterWide® picture (TheaterWide 2 and 3 only)

You can set separate scroll settings for the TheaterWide 2 and TheaterWide 3 modes for each input.

To set the scroll settings:

1 Press Yand open the Video menu.

2 Highlight Theater Settings and press T.

Video

Mode	Sports
Picture Settings
Noise Reduction
ColorMaster
xvYCC Selection	Auto
Game Mode	Off
Theater Settings
TheaterLock	Off

3 In the Picture Size field, select either TheaterWide 2 or TheaterWide 3 (you cannot scroll in any other mode).

4 Press b to highlight the Picture Scroll field.

5 Press C or c to scroll the picture up and down as needed, from –10 to +20.

Theater Settings				Mode: Sports
	Picture Size		TheaterWide 2
	Picture Scroll	-5
	Cinema Mode			Film
	Auto Aspect Ratio			On

ResetDone

6 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.

Using the auto aspect ratio feature

When the auto aspect ratio feature is set to On, the TV will automatically select the picture size when one of the following input sources is received:

•A 480i signal from the VIDEO 1, VIDEO 2, ColorStream HD-1, or ColorStream HD-2input.

•A 480i, 480p, 720p, 1080i, 1080p, or VGA signal from the HDMI input.

Aspect ratio of	Automatic aspect size (automatically
signal source	selected when Auto Aspect is On)
4:3 normal	Natural (with sidebars)
4:3 letter box	TheaterWide 2
16:9 full	Full
Not defined	The current picture size you set under
(no ID-1 data
or HDMI	“Selecting the picture size” on page 51.
aspect data)

Note: The auto aspect ratio feature is not applicable to antenna or cable input sources.

To turn on the auto aspect ratio feature:

1 Press Yand open the Video menu.

2 Highlight Theater Settings and press T. 3 In the Auto Aspect Ratio field, select On.

Theater Settings			Mode: Sports
	Picture Size		Natural
	Picture Scroll	--
	Cinema Mode		Film
	Auto Aspect Ratio		On

ResetDone

4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.

To turn off the auto aspect ratio feature:

Select Off in step 3 above.

53