Toshiba 40RF350U manual Connecting an Hdmi or DVI device to the Hdmi input

Page 19

Chapter 2: Connecting your TV

Connecting an HDMI™ or DVI device to the HDMI input

The HDMI input on your TV receives digital audio and uncompressed digital video from an HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device.

This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) program material in digital form from EIA/CEA-861-D–compliant[1]consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).

The HDMI input can accept and display VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz), and 1080p (24Hz/60Hz) signal formats. For detailed signal specifications, see page 79.

Supported Audio format: Linear PCM, sampling rate 32/44.1/ 48 kHz

Note:

•Some legacy HDMI sources may not work properly with your latest HDMI TV, due to the adoption of a new standard. Please unplug your HDMI cable(s) first and try setting the following two options (Lip-Sync Latency, xvYCC) to “Off”. Now your legacy HDMI source should operate properly with your TV. See page 68.

•To connect a PC to the HDMI input, see page 22.

To connect an HDMI device, you will need:

•one HDMI cable (type A connector) per HDMI device

–For proper operation, it is recommended that you use an

HDMI cable with the HDMI Logo ( ).

–If your HDMI connection is capable of 1080p and/or your TV is capable of refresh rates greater than 60Hz, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly with this mode.

–HDMI cable transfers both video and audio. Separate analog audio cables are not required (see illustration).

–See “Setting the HDMI™ audio mode” (- page 43).

TV lower back panel

HDMI device

VIDEO

AUDIO

HDMI OUT

L

R

 

IN IN

OUT

LR

To view the HDMI device video:

Select the HDMI 1, HDMI 2, or HDMI 3 video input source on the TV.*

*To select the video input source, press INPUT on the remote control (- page 24). To program the TV remote control to operate other devices, see Chapter 3.

To connect a DVI device, you will need:

•one HDMI-to-DVI adapter cable (HDMI type A connector) per DVI device

–For proper operation, the length of an HDMI-to-DVI adapter cable should not exceed 9.8 ft (3m). The recommended length is 6.6 ft (2m).

•one pair of standard analog audio cables per DVI device

–An HDMI-to-DVI adapter cable transfers video only. Separate analog audio cables are required (see illustration).

–See “Setting the HDMI™ audio mode” (- page 43).

TV upper back panel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TV lower back panel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVI device

VIDEO

AUDIO

DVI/HDCP

L

R

OUT

 

IN IN

 

 

OUT

L

R

Note: To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:

•When turning on your electronic components, turn on the TV first, and then the HDMI or DVI device.

•When turning off your electronic components, turn off the HDMI or DVI device first, and then the TV.

[1]EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high- definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents 40RF350U 46RF350U Dear Customer Safety PrecautionsInstallation Important Safety InstructionsInstallation, Care, and Service Additional Safety PrecautionsCare ServiceRemoving the Pedestal Stand To Display your LCD TV using a Wall BracketChoosing a location for your LCD TV To Display your LCD TV on the included Pedestal StandImportant notes about your LCD TV PartTrademark Information Contents Troubleshooting Introduction Features of your new TVWelcome to Toshiba Introduction Green and Yellow LEDs TV front and side panel controls and connectionsColorStream HD-1 and ColorStream HD-2 TV back panel connectionsOverview of cable types Connecting your TVAbout the connection illustrations To view the VCR Connecting a VCR and antenna or Cable TV no Cable boxTo view the antenna or Cable signal You will needStandard audio cables Connecting a VCR with S-video and a cable boxTo view basic and premium Cable channels Coaxial cables Video cableTo record a TV program while watching a DVD To view antenna or Cable channelsTo view the DVD player To view the VCR or view and record antenna channelsTo control the devices To connect the IR blaster cableIf you cannot locate the device’s infrared sensor To view the camcorder video Connecting a camcorderSelect the Video 2 video input source on the TV To connect a DVI device, you will need Connecting an Hdmi or DVI device to the Hdmi inputTo connect an Hdmi device, you will need To view the Hdmi device videoThree Hdmi cables For the setup shown above, you will needCE-Link connection Before controlling the devicesTo control the audio Connecting an audio systemTo connect a PC to the Hdmi terminal on the TV Connecting a personal computer PCSignal To connect a PC to the PC in terminal on the TVTo install the remote control batteries Using the remote controlInstalling the remote control batteries Remote control effective rangeTheaterWide 1/2/3, Full, 43 HD, and Native Learning about the remote controlCombo Receiver Remote Control functional key chartSatellite DVD CH RTN Mode Select Device mode control after programming Using the remote control to operate your other devicesDevice code setup Mode Select Default device mode control before programmingTo reset the remote control Using the volume lock featureOperational feature reset To unlock the remote control’s volume keysCable boxes TVsSatellite receivers 3D LAB DVDsVCRs DVD/VCR ComboKEC STS Audio Amp PVRsCable/PVR Combo DBS/PVR ComboSAE Audio Amp/TunersMain menu layout Menu layout and navigationIcon Option Thinc menu Setup/Installation menu layoutSetup menu InstallationVideo Navigating the menu systemTo select the menu language Setting up your TVTo configure the ANT input source Selecting the menu languageTo add or delete channels in the channel memory Programming channels automaticallyManually adding and deleting channels in the channel memory To program channels automaticallySetting the Auto Input feature To assign channel labels To reset Auto InputLabeling channels To turn off the Auto InputTo delete the custom label Setting the Hdmi audio modeTo set the Hdmi audio mode To remove channel labelsReset Factory Defaults Viewing the digital signal meterViewing the system status Selecting the Blue LED Illumination level Selecting the Power-On ModeTo cancel the reset To set the Power-On Mode featurePress CABLE/SAT, DVD, or VCR/PVR Using the TV’s featuresTo label the video input sources Input labeling exampleTo clear the input labels Tuning channels using Channel Browser Tuning channelsFavorites Browser Elements of the Channel Browser Setting the Channel Tuning ModeAdding and clearing channels and inputs in the History List To set the Channel Tuning Mode Tuning to a specific channel programmed or unprogrammedSwitching between two channels using Channel Return Switching between two channels using SurfLockTheaterWide 2 picture size for letter box programs Selecting the picture sizeNatural picture size TheaterWide 1 picture size for 43 format programsFull picture size for 169 480i, 480p source programs only To turn off the auto aspect ratio feature Using the auto aspect ratio featureTo set the scroll settings To turn on the auto aspect ratio featureAdjusting the picture Using the Freeze featureSelecting the picture mode To turn on TheaterLock Using the TheaterLock featureAdjusting the picture quality To adjust the picture qualityTo view captions or text Using the closed caption modeDigital CC Settings Base closed captionsCC Selector Adjusting the audioUsing the Closed Caption button on the remote control Using the digital audio selectorMTS field, select Stereo Press C or c to adjust the levelSelecting stereo/SAP broadcasts To listen to stereo soundUsing the Dolby Digital Dynamic Range Control feature Using the StableSound featureChanging your PIN code Using the Locks menuEntering the PIN code If you cannot remember your PIN codeTo download the additional rating system if available Press b to highlight Enable Rating BlockingBlocking TV programs and movies by rating V-Chip To block and unblock TV programs and moviesTo block channels Blocking channelsTo unblock individual channels Unlocking programs temporarily Using the input lock featureUsing the control panel lock feature Using the GameTimerTo set the PC Audio Using the PC settings featureSetting the PC Audio To adjust the PC settingsUsing CE-Link Setting the sleep timerCE-Link playback device HD DVD player, etc. control Other CE-Link functions CE-Link input source selectionCE-Link Player Control menu functions To set the CE-Link Setup Using the Hdmi settings featureTo set the Hdmi Settings To display TV status information using Info Understanding the auto power off featureUnderstanding the last mode memory feature To display TV status information using RecallUsing the static gamma feature Using the TV’s advanced featuresUsing the advanced picture settings features Using dynamic contrastTo change the CableClear settings Selecting the color temperatureUsing CableClear digital noise reduction To select the color temperatureUsing the ColorMaster feature Using Mpeg noise reductionUsing Color Palette Adjustment Press Rto return to the previous menu Using the xvYCC Selection featureTo reset ColorMaster to its factory settings To change the xvYCC SelectionOn or Off Using the Game Mode featureTo turn on Game Mode WOW SRS 3D To turn the surround sound effectGeneral troubleshooting TroubleshootingHdmi problems Channel tuning problemsClosed caption problems Rating blocking V-Chip problemsLED indications LED Indication Condition SolutionAppendix SpecificationsFormat Resolution Frequency Pixel Clock Frequency Acceptable signal formats for PC in and Hdmi terminals1280 60.020Hz 63.981kHz 108.000MHz For LCD Televisions 26 and Larger Limited United States WarrantyFor Toshiba Brand Flat Panel Televisions Limited Canadian WarrantyDisclaimer and Limitation of Remedy Appendix Freeze IndexWowsrs 3D 07-08
Top Page Image Contents