Toshiba 40RF350U Using the PC settings feature, Setting the PC Audio, To adjust the PC settings

Chapter 6: Using the TV’s features

Using the PC settings feature

You can view an image from a PC on the TV screen.

When a PC is connected to the TV's PC IN terminal, you can use the PC Settings feature to make adjustments to the image.

If the edges of the picture are cut off, readjust the Horizontal Position and Vertical Position. If the picture is affected by interference, readjust the Clock Phase and Sampling Clock.

To adjust the PC settings:

1 Repeatedly press +to select PC input mode

(- “Selecting the video input source to view” page 46).

2 Press Yand open the Setup menu.

3 Highlight PC Settings and press T.

Setup

Installation
CE-Link Setup
Sleep Timer
HDMI Settings
PC Settings
Blue LED Illumination	High

Power-On Mode Power-Saving

Note: If a PC is not connected or there is no PC input signal, this feature will be grayed out in the Setup menu.

4 Press B or b to highlight the item you want to adjust. 5 Press C or c to make the appropriate adjustments.

PC Settings

Horizontal Position		0
Vertical Position		0
Clock Phase		0
Sampling Clock		0
	Reset		Done

Note: The screen is disrupted momentarily when adjusting the PC settings. This is not a sign of malfunction.

•Horizontal Position:

Moves the picture left/right.

The adjustment range is within ±10 from center.*

•Vertical Position:

Moves the picture up/down.

The adjustment range is within ±10 from center.*

•Clock Phase:

Helps to reduce noise and sharpen the picture. The adjustment range is within ±4 from center.*

•Sampling Clock:

Helps to reduce noise and minimize periodic vertical stripes on the screen.

The adjustment range is within ±5 from center.*

*The default settings and adjustable ranges may vary depending on the input signal format.

Setting the PC Audio

This function allows you to output or mute the sound from your PC when connecting using the PC IN terminal and an analog RGB cable. (- page 22)

To set the PC Audio:

1 Press Yand open the Audio menu.

2 Highlight Audio Setup and press T.

3 Press B or b to select PC Audio and then press C or c to select No or Yes.

Yes: Outputs the sound from your PC.

No: Mutes the sound from your PC, and outputs the sound from the HDMI-1 (DVI) connection.

Audio Setup

PC Audio		No
HDMI 1 Audio		Auto
MTS		Stereo
Language		English
Optical Output Format		Dolby Digital
Dolby Digital		Compressed
Dynamic Range Control
	Reset	Done

Note: Because the PC and HDMI-1 inputs share the same set of analog audio inputs, the PC Audio menu setting influences the HDMI 1 Audio menu setting. If PC Audio is set to “No,” the HDMI 1 Audio setting changes to “Auto.” If PC Audio is set to “Yes,” the HDMI 1 Audio setting is set to “Digital” and is grayed out in the menu. (Also see item 5 on page 12 and “Setting the HDMI™ Audio mode” on page 43.)

65