Toshiba 40UL605U, 55UL605U, 46UL605U owner manual Setting AV Input mode, Setting the Hdmi audio mode

Chapter 5: Setting up your TV

Note: Skipped channels cannot be selected with

or ; however, they can still be accessed using the number keys on the remote control.

Setting AV Input mode

This setting determines the configuration of the shared AV input on your TV. You can set this input

for either ColorStream HD or Video.

1無 From the Preferences menu, highlight AV Input. 2無 Press t or u to select your desired setting.

Note: If you select the wrong setting, picture will have no color or be fuzzy.

Setting the HDMI® audio mode

To set the HDMI audio mode:

1無 Press and open the Sound menu.

2無 Highlight Audio Setup and press .

3無 Press p or q to select HDMI 1 Audio and then press t or u to select the HDMI 1 audio mode (Auto, Digital, or Analog). (Auto is the recommended mode.) See “Connecting an HDMI or DVI device to the HDMI input” ( page 18).

Mode Description

When viewing the HDMI 1 input, if digital audio from the HDMI input is

Auto available, it will be output. If not, the TV will automatically detect and output analog audio from the PC Audio input.

When viewing the HDMI 1 input, Digital digital audio from the HDMI input will

be output.

When viewing the HDMI 1 input, Analog analog audio from the PC Audio input

will be output.

4無 To save your settings, highlight Done and press

.

Note: Because the PC and HDMI-1 inputs share the same set of analog audio inputs, the PC Audio menu setting influences the HDMI 1 Audio menu setting. If PC Audio is set to “No,” the HDMI 1 Audio setting changes to “Auto.” If PC Audio is set to “Yes,” the HDMI 1 Audio setting is set to “Digital” and is grayed out in the menu. (Also see item 3 on page 14 and “Setting the PC Audio” on page 54.)

Viewing the digital signal meter

You can view the digital signal meter in the ANT/ CABLE digital TV input source only.

To view the digital signal meter:

1無 Press and open the Setup menu.

2無 Highlight Installation and press .

3無 A new set of Installation menu icons will appear. Open the Terrestrial menu, highlight Signal

Meter, and press .

4無 Press pqtu to select the antenna input and digital channel whose signal you want to check.

Note:

•The physical digital channel number listed in the Signal Meter screen may not correspond to a virtual TV channel number. Contact your local broadcasters to obtain the RF channel numbers for your local digital stations.

•The signal strength does not change between virtual channels on the same physical channel.

To close the screen and return to the Terrestrial menu:

Highlight Done and press .

To return to normal viewing:

Press .

(continued)

36