Toshiba 40UL605U TV Size Hole PatternHxV, Removing the Pedestal Stand, 40 TV, 46 TV, 55 TV

7) VESA Mounting Pattern

TV Size	Hole Pattern(HxV)	Screw Size
40”	400x400 mm	M8
46’’	400x400 mm	M8
55’’	400x400 mm	M8

(unit in mm)

Removing the Pedestal Stand

1)Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface.

Note: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel.

2)Remove the four screws shown in the right diagram. This will allow removal of the pedestal stand.

3)Once you have removed all four screws, holding the pedestal stand in place, remove the pedestal stand from the TV.

40” TV

VESA Mounting Pattern

Four screws Hook

Sturdy strap

(as short as possible)

46” TV

VESA Mounting Pattern

Four screws	Hook
	Sturdy strap
	(as short as possible)

55” TV

VESA Mounting Pattern

Four screws	Hook
	Sturdy strap
	(as short as possible)

CAUTION: Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. To secure the TV, use a sturdy strap from the hook(s) on the rear of the TV to a wall stud, pillar, or other immovable structure. Make sure the strap is tight, secure, and parallel to the floor.

6