Basic setup
Starting setup
POWER
The STARTING SETUP function makes installing your unit easily. It leads you the Language selection, TV/CABLE selection and auto channel memory automatically.
IMPORTANT: Make sure that the antenna or cable TV system connection is made!
/
ENTER
Starting setup
1 Press POWER.
The starting setup function begins and the Language setup menu appears on the screen. Press 
or 
to select your desired language, then press ENTER.
POWER
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
ENTER
<
/
/ ENTER>
2 Press 
or 
to select “TV” or “CABLE”, then press ENTER.
CHANNEL PLAN
TV
CABLE
ENTER
<
/
/ ENTER>
Press 
or 
to select “START”, then press
3 ENTER.
If you select “CANCEL” and press ENTER, the STARTING SETUP stops and changes to the TV screen.
AUTO SETUP
START
CANCEL
4 Now the “AUTO CH MEMORY” and “AUTO CLOCK”starts.
After the starting setup is completed, the TV channel appears on the screen.
AUTO CH MEMORY
STOP : CANCEL
Notes:
•The starting setup function will work only when you press the POWER button for the first time.
•In “AUTO CLOCK” setting, it may take more than 10 minutes to read the EDS signal for one channel, which has only “Time of day” or “Local time zone”.
ENTER
<
/
/ ENTER>
18
5Q10501A | 18 | 4/17/04, 11:56 AM |