Toshiba MW27FPX Duplicating a video tape, Other functions VCR, REC Stop Input Select SP/SLP

LINE1: on the rear panel

LINE2: on the front panel

Press both REC at the same time.

REC

Press PLAY on the playback VCR or camcorder.

Other functions (VCR)

Duplicating a video tape

TV/VCR

If you connect the unit to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power.

REC

STOP

INPUT SELECT SP/SLP

Duplicating a video tape

Preparation:

•Press TV/VCR to select the TV/VCR mode.

•Load a cassette tape with the erase prevention tab intact.

•Load a previously recorded tape into the playback VCR or Camcorder.

1 Press SP/SLP to select the desired tape speed SP or SLP.

It is recommended that you set the

Speed to the SP mode on the

recording VCR for best results.

Press INPUT SELECT once or twice to select

2 AUDIO/VIDEO input position.

“LINE1” or “LINE2” will appear on the screen.

Connection with second video recorder

• Select “LINE1” on step 2.

Playback VCR

	To VIDEO OUT
To S-VIDEO OUT	To AUDIO (R) OUT
S-video cable (not supplied)	To AUDIO (L) OUT
Recording VCR
	Audio/Video cable
	(not supplied)

LINE1

	To VIDEO IN
To S-VIDEO IN	To AUDIO (R) IN
	To AUDIO (L) IN

Note:

An S-video connection is superior to Video (Yellow) input.

3

4

5 PressSTOP STOP after duplicating a video tape.

Note:

Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringe the rights of copyright owners and be contrary to copyright laws.

Connection with Camcorder

• Select “LINE2” on step 2.

Playback Camcorder

Recording VCR

To AV Jack

Illustration of MW24FPX

To AUDIO (R) IN

To AUDIO (L) IN

To VIDEO IN

Audio/Video cable (not supplied)

	For duplicating a previously recorded tape from a
	camcorder, follow the camcorder manufacturer’s
	instructions. A typical camcorder dubbing hookup is
42	shown above.

5Q10501A [E]p42-43 42 4/17/04, 3:33 PM