Toshiba MW27FPX To memorize channels, TV/CABLE selection, Automatic memory tuning, Channel Menu

TV operation

To memorize channels

This unit is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the unit’s memory. In addition to normal VHF and UHF channels, this unit can receive up to 113 cable TV channels. To use this unit with an antenna, set the TV/CABLE selection to the TV position. When shipped from the factory, this selection is in the CABLE position.

0–9

CHANNEL /

MENU

// /

TV/CABLE selection

1	Press MENU in the TV mode, then press			or
	to select	option.	￿￿￿￿￿￿	￿￿￿￿￿
		ENTER	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
2	ENTER		￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿	￿￿￿￿￿
	Press or	to select “TV/CABLE”.

￿￿￿￿￿￿￿￿

3 Press or to select “TV” or “CABLE”. TV - VHF/UHF channels

CABLE - Cable TV channels

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ ￿￿

ENTER

4 Press MENU repeatedly until the menu screen is cleared.

Cable TV chart

The chart below is typical of many cable system channel allocations.

Automatic memory tuning

Press or to select the “AUTO CH MEMORY”, then press .

The TV will begin memorizing all the channels available in your area.

	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿			￿￿￿￿￿
ENTER	￿	￿	￿￿￿￿￿

To ADD/DELETE channels

Press or	to select “ADD/DELETE”, then
1 press .	￿￿￿￿￿￿￿￿￿￿	￿￿￿￿￿
ENTER	￿￿￿￿￿￿￿￿￿￿
	￿￿￿￿￿￿￿

2 Select the desired channel to be added or deleted using Direct channel selection (0–9), /

or CHANNEL /.

1 2 3

4 5 6 ENTER

CHANNEL

7 8 9

0

3 Press or to select “ADD” or “DELETE”, whichever function you want to perform.

ADD CH 001

ENTER

0-9 / //// MENU

Note:

You can not select option if you set the channel to “LINE1” or “LINE2”.

26

5Q10501A [E]p22-26 26 4/17/04, 11:56 AM